AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-5931 PUMP GP-GOV & FUEL INJ Type 2 3306B TRUCK ENGINE


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING

TRUCK ENGINE 3306B TRUCK ENGINE 5KD
 3306B Truck Engine 5KD00001-UP HEBP1570 3306B 5KD   (1986)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP
2W-2410 GOVERNOR GP
LEVER GP-GOVERNOR CONTROL
9N-1046 LEVER GP-GOVERNOR CONTROL
PUMP GP-GOV & FUEL INJ
7C-0496 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5931 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5931 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5931 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5932 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5932 PUMP GP-GOV & FUEL INJ
 

#HEBP15700200
 

7W-5931: PUMP GP-GOV & FUEL INJ

7W-5931 PUMP GP-GOV & FUEL INJ
Type 2
i00413776 HEBP1570
7W5931 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5735 [1] LEVER AS-PIVOT  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
2. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
3. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
4. 8J-8343 [1] SEAL-O-RING  
5. 033-5879 [1] SEAL-O-RING  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
8. 7W-5932 Y [1] PUMP GP-GOV & FUEL INJ  
9. 7N-2176 [1] PIN-DETENT  
10. 8N-3096 [1] SPRING-DETENT  
11. 7N-1052 [1] DOWEL  
12. 1W-1597 CY [1] TORQUE CONTROL GP  
13. 8M-9141 [1] SPRING  
14. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
15. 7N-8768 [1] GASKET  
16. 8M-8515 [1] SEAL-O-RING  
17. 5P-6620 [1] SEAL-O-RING  
18. 8N-5784 [1] DEFLECTOR-PULSE  
19. 3J-1907 [1] SEAL-O-RING  
20. 2W-2410 Y [1] GOVERNOR GP  
21. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
22. 8L-5832 [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#HEBP15700201
 

7W-5931: PUMP GP-GOV & FUEL INJ

7W-5931 PUMP GP-GOV & FUEL INJ
Type 3
i00413787 HEBP1570
7W5931 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5735 [1] LEVER AS-PIVOT  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
2. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
3. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
4. 8J-8343 [1] SEAL-O-RING  
5. 033-5879 [1] SEAL-O-RING  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 7N-9907 [1] COVER  
  150-3727 [1] GASKET-FUEL  
8. 6I-2831 CY [1] PUMP GP-FUEL INJECTION  
9. 7N-2176 [1] PIN-DETENT  
10. 8N-3096 [1] SPRING-DETENT  
11. 7N-1052 [1] DOWEL  
12. 1W-1597 Y [1] TORQUE CONTROL GP  
13. 8M-9141 [1] SPRING  
14. 2W-5448 [1] COVER  
  144-0477 [1] GASKET  
15. 150-3726 [1] GASKET  
16. 8M-8515 [1] SEAL-O-RING  
17. 5P-6620 [1] SEAL-O-RING  
18. 8N-5784 [1] DEFLECTOR-PULSE  
19. 3J-1907 [1] SEAL-O-RING  
20. 2W-2410 Y [1] GOVERNOR GP  
21. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
22. 8L-5832 [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#HEBP15700202
 

7W-5932: PUMP GP-GOV & FUEL INJ

7W-5932 PUMP GP-GOV & FUEL INJ
S/N 5KD472-UP
PART OF 7C-0496, 7W-5931 PUMP GP-GOV & FUEL INJ
Type 1
i00413802 HEBP1570
7W5932 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 1W-3487 Y [1] HOUSING GP-FUEL PUMP  
4. 7W-5928 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 7E-4846 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
8. 7N-1046 [1] GASKET-COVER  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 8N-2489 [6] LIFTER AS  
12. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
13. 7N-1047 [1] COVER-TIMING  
14. 7W-5930 [1] CAMSHAFT AS  
  7W-7331 [1] CAMSHAFT-FUEL PUMP  
15. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
  4N-9019 [1] DOWEL  
16. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
  7N-7264 [4] WEIGHT-GOVERNOR  
  9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
  1S-5440 [4] DOWEL  
17. 8N-2511 [1] CARRIER-WEIGHT  
18. 7N-7166 [2] RACE-THRUST BEARING  
  7L-3326 [1] BEARING-THRUST  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#HEBP15700203
 

7W-5932: PUMP GP-GOV & FUEL INJ

7W-5932 PUMP GP-GOV & FUEL INJ
S/N 5KD472-UP
PART OF 7C-0496 PUMP GP-GOV & FUEL INJ
Type 2
i00976113 HEBP1570
7W5932 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
4. 7W-5928 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 114-8718 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
8. 7N-1047 [1] COVER-TIMING  
  150-3724 [1] GASKET  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 4P-9832 C [6] LIFTER AS  
12. 6I-2987 C [1] HOUSING AS-PUMP  
13. 1S-1953 [1] BEARING-RACK  
14. 1W-3285 [1] BEARING-RACK  
15. 4P-8480 [6] PIN-PUMP GUIDE  
16. 6I-0979 [6] DOWEL  
17. 6I-1631 [1] BUSHING  
18. 7N-7970 [1] BUSHING  
19. 7W-5930 [1] CAMSHAFT AS  
  7W-7331 [1] CAMSHAFT-FUEL PUMP  
20. 7N-7264 [4] WEIGHT-GOVERNOR  
21. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
22. 1S-5440 [4] DOWEL  
23. 4N-9019 [1] DOWEL  
24. 8N-2511 [1] CARRIER-WEIGHT  
25. 7L-3326 [1] BEARING-THRUST  
26. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
27. 7N-7166 [2] RACE-THRUST BEARING  
28. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#HEBP15700204
 

1W-1597: TORQUE CONTROL GP

1W-1597 TORQUE CONTROL GP
PART OF 7W-5931 PUMP GP-GOV & FUEL INJ
i00690304 HEBP1570
1W1597 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3306B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5897 C [2] BOLT (1/4-20X0.875-IN)  
2. 7W-5700 C [1] CONTACT  
3. 2W-7234 C [1] BAR-LOAD STOP (4-MM)  
4. 7N-1796 C [1] SPACER (1.549-MM THK)  
5. 1P-6452 [1] INSULATOR  
6. 2P-2685 [1] SPACER (0.635-MM THK)  
7. 8M-9062 [1] RETAINER-SPRING (3.05-MM THK)  
8. 8N-7520 [1] SPRING-TORQUE (0.559-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP15700205
 

8N-7276: TORQUE CONTROL GP

8N-7276 TORQUE CONTROL GP
PART OF 7C-0496, 7W-5931 PUMP GP-GOV & FUEL INJ
i00189058 HEBP1570
8N7276 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3306B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1796 [1] SPACER (1.549-MM THK)  
2. 8N-7519 [1] SPRING-TORQUE (0.635-MM THK)  
3. 2W-7234 [1] BAR-LOAD STOP (4-MM)  
4. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
5. 8M-9062 [1] RETAINER-SPRING (3.05-MM THK)  
6. 2P-2685 [1] SPACER (0.635-MM THK)  
7. 1P-6452 [1] INSULATOR  
8. 7W-5700 [1] CONTACT  
 

#HEBP15700206
 

9N-6232: TORQUE CONTROL GP

9N-6232 TORQUE CONTROL GP
LIMITER
PART OF 4W-5500, 7C-6943 CONTROL AR-TORQUE LIMITING
i00438809 HEBP1570
9N6232 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3306B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0112 C [4] BOLT-SOCKET HEAD  
2. 5B-3180 [1] NUT (5/16-18-THD)  
  5N-4185 [1] WASHER-SPECIAL  
3. 9N-6252 [1] SCREW-ADJUSTMENT  
4. 9N-6251 [1] SPRING-ADJUSTMENT  
5. 9N-6249 [1] SPRING-RETAINING  
6. 9N-6247 [1] HOUSING  
7. 9N-6239 [4] FLYWEIGHT  
8. 9N-6236 [1] SEAT AS  
9. 4W-9052 C [4] PIN  
10. 9N-6242 [1] CARRIER AS  
11. 4L-7711 [1] SEAL-O-RING  
12. 5P-4672 [1] RING-RETAINING  
13. 9N-6233 [1] VALVE AS  
14. 6M-5062 [4] SEAL-O-RING  
15. 9N-6248 [1] GASKET  
16. 9N-6250 [1] COVER  
17. 8S-7115 CE LOCKWIRE (10CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#HEBP15700207
 

100-5045: ALTERNATOR GP-CHARGING

100-5045 ALTERNATOR GP-CHARGING
S/N 5KD2008-UP
24 VOLT, 50 AMPERE
PART OF 100-5047 ALTERNATOR GP-CHARGING
i00188155 HEBP1570
1005045 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3306B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-2793 [1] FAN AS (12-BLADE)  
2. 7T-2790 [1] ROTOR AS  
3. 7T-6418 [1] STATOR AS  
4. 7T-2792 [1] FRAME AS  
5. 7T-6417 [1] COIL AS  
6. 7T-2798 [1] REGULATOR AS-VOLTAGE (24-VOLT)  
7. 7T-2797 [1] COVER  
8. 7T-6416 [1] HOLDER AS-BRUSH (ALTERNATOR)  
9. 7T-2795 [1] FRAME AS  
10. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
11. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
12. 7T-2801 [1] CONDENSER  
13. 7X-0447 [1] NUT (7/16-14-THD)  
14. 2H-3920 [1] LOCKWASHER  
15. 9L-6770 [1] CAP-DUST  
16. 6V-8185 [1] NUT (1/4-20-THD)  
17. 1H-3244 [1] LOCKWASHER  
18. 7T-2802 [1] WIRE AS  
  1B-8705 F [1] KEY-WOODRUFF  
   
    AVAILABLE REPAIR KIT(S):
  7T-2799 [1] KIT-BEARING  
  7T-2800 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES INSULATOR, LOCKWASHER & WASHER)
  7T-2803 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES SCREW AS & BOLT AS)
  7T-2804 [1] KIT-ALTERNATOR TERMINAL (RELAY)  
    (INCLUDES CAP, BOLT, WIRE AS & BUSHING)
  7T-2805 [1] KIT-ALTERNATOR TERMINAL (NEGATIVE)  
    (INCLUDES INSULATOR, LOCKWASHER, NUT & WASHER)
  7T-2816 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES WASHER, SPACER, RING, PLATE AS & BOLT AS)
  F   NOT SHOWN
 

#HEBP15700208
 

100-5046: ALTERNATOR GP-CHARGING

100-5046 ALTERNATOR GP-CHARGING
S/N 5KD2008-UP
24 VOLT, 50 AMPERE
PART OF 100-5047 ALTERNATOR GP-CHARGING
i00188156 HEBP1570
1005046 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3306B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-7566 [1] FRAME-DRIVE END  
2. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
3. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
4. 1B-8705 [1] KEY-WOODRUFF  
5. 9G-7549 [1] SPACER (25X40X9.5-MM THK)  
6. 9G-7551 [1] BEARING  
7. 9G-7564 [1] FAN  
8. 9G-7548 [1] RING  
9. 3T-1886 [1] STATOR AS  
10. 3T-1885 [1] COIL AS-FIELD  
11. 9G-7560 [1] ROTOR AS  
12. 3T-1887 [1] DIODE AS  
13. 9G-7568 [1] FRAME AS-REAR  
14. 9G-7562 [1] COVER AS  
15. 9G-7553 [1] RING-COVER  
16. 9G-7552 [1] BEARING  
17. 9L-6770 [1] CAP-DUST  
18. 9G-7567 [1] REGULATOR AS-VOLTAGE (24-VOLT)  
19. 7X-0447 [1] NUT (7/16-14-THD)  
20. 5C-2874 M [1] NUT (M5X0.8-THD)  
21. 7X-0620 [1] WASHER-HARD (5.5X13X1.6-MM THK)  
22. 9X-6001 M [4] BOLT (M5X0.8X150-MM)  
23. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
24. 8T-5360 [1] WASHER (12X22.5X2.5-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  9G-7554 [1] KIT-TERMINAL GROUND (ALTERNATOR AIR)  
    (INCLUDES LOCKWASHER & HEX NUT)
  9G-7555 [1] KIT-OUTPUT TERMINAL (ALTERNATOR AIR)  
    (INCLUDES 2 LOCKWASHERS, 2 HEX NUTS & 2 INSULATING BUSHINGS)
  9G-7556 [1] KIT-CAPACITOR (ALTERNATOR AIR)  
    (INCLUDES LOCKWASHER, SCREW & INTERFERENCE CAPACITOR)
  9G-7559 [1] KIT-RELAY TERMINAL (ALTERNATOR AIR)  
    (INCLUDES LOCKWASHER, END SPICE, TUBE, PIN TERMINAL, WASHER, INSULATING WASHER & BUSHING, PROTECTION CAP & HEX NUT)
  9G-7565 [1] KIT-REGULATOR TERMINAL (ALTERNATOR AIR)  
    (INCLUDES WASHER, INSULATING WASHER & BUSHING, LOCKWASHER & HEX NUT)
  M   METRIC PART
 

#HEBP15700209
 

100-5047: ALTERNATOR GP-CHARGING

100-5047 ALTERNATOR GP-CHARGING
S/N 5KD2008-2111
24 VOLT, 50 AMPERE
i00188157 HEBP1570
  For full view, you need register

Parts for your 3306B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  100-5045 Y [1] ALTERNATOR GP-CHARGING  
    -OR-
  100-5046 Y [1] ALTERNATOR GP-CHARGING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/05/12
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
New Torque Specification For Fuel Injection Pump Bushing
1982/09/29
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Over Fueling Spring No Longer Used In Governor
1985/02/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection<BR> Injection Timing Before Top Center (BTC)
3306B DIESEL TRUCK ENGINE
Fuel Injection Pump
3306B DIESEL TRUCK ENGINE
Governor
3306B DIESEL TRUCK ENGINE
Governor Control (Low Speed Regulation)
3306B DIESEL TRUCK ENGINE
Governor Control Linkage
3306B DIESEL TRUCK ENGINE
Automatic Timing Advance
3306B DIESEL TRUCK ENGINE
Disassembly and Assembly
Fuel Injection Nozzles
3306B DIESEL TRUCK ENGINE
Fuel Injection Pumps
3306B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3306B DIESEL TRUCK ENGINE
Fuel Ratio Control
3306B DIESEL TRUCK ENGINE
Oil Filter And Oil Filter Base
3306B DIESEL TRUCK ENGINE
Cylinder Liners
3306B DIESEL TRUCK ENGINE
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25

Caterpillar Parts SIS Catalog 3306B :

PUMP GP-GOV & FUEL INJ
7W-5931 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-0496 PUMP GP-GOV & FUEL INJ
PUMP GP-FUEL TRANSFER
1W-1695 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1W-1695 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL PRM & PRIM FILTER
8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRIMING
8N-3365 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
8N-3365 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
7W-6041 PUMP GP-FUEL PRIMING
PUMP GP-GOV & FUEL INJ
7W-5931 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5932 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5932 PUMP GP-GOV & FUEL INJ
TORQUE CONTROL GP
1W-1597 TORQUE CONTROL GP
TORQUE CONTROL GP
8N-7276 TORQUE CONTROL GP
TORQUE CONTROL GP
9N-6232 TORQUE CONTROL GP
ALTERNATOR GP-CHARGING
100-5045 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
100-5046 ALTERNATOR GP-CHARGING

Truck sale:

Caterpillar 3306B
 
Caterpillar 3306B
- Stationary Generator Sets
THOMPSON MACHINERY COMMERCE CORPORATION
 
41,500 
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3306B, Stationary Generator Sets, Construction
33,500 
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
38.001 
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
 
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.