OPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
CYLINDER GPOPERATOR STATION
CONTROL GP-HYDRAULIC
#HEBP16790360
7G-5505: CONTROL GP-HYDRAULIC HAND
7G5505 CONTROL GP-HYDRAULIC HAND-PART 1 OF 2
LIFT ONLY
PART OF 3W3925, 3W3935, 5G9307 & 5G9311 HYDRAULIC ARS
AN ATTACHMENT
LIFT ONLY
PART OF 3W3925, 3W3935, 5G9307 & 5G9311 HYDRAULIC ARS
AN ATTACHMENT
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-8117 | [1] | CHANNEL AS | |
| 2. | 0S-0509 | [2] | BOLT | |
| 3. | 5M-2894 | [7] | WASHER | |
| 4. | 1A-2029 | [3] | BOLT | |
| 5. | 0S-1591 | [3] | BOLT | |
| 1D-4717 | [3] | NUT (FULL) | ||
| 6. | 5P-8166 | [1] | FILM-INSTRUCTION | |
| 7. | 9P-1455 | [1] | LEVER | |
| 8. | 0S-1588 | [2] | BOLT | |
| 9. | 3W-3986 | [1] | LEVER | |
| 10. | 3W-3987 | [1] | LEVER | |
| 11. | 8T-8932 C | [1] | PIN AS-SPRING | |
| 12. | 1M-1341 | [1] | ROD END-YOKE | |
| 13. | 6P-5209 | [1] | COVER | |
| 6J-2214 | [4] | SCREW | ||
| 14. | 4L-7551 | [1] | ROD-CONTROL | |
| 1B-4203 | [2] | NUT-FULL | ||
| 15. | 5J-5315 | [1] | ROD END | |
| 2L-6267 | [1] | LOCKNUT | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
#HEBP16790361
7G-5505: CONTROL GP-HYDRAULIC HAND
7G5505 CONTROL GP-HYDRAULIC HAND-PART 2 OF 2
LIFT ONLY
PART OF 3W3925, 3W3935, 5G9307 & 5G9311 HYDRAULIC ARS
AN ATTACHMENT
LIFT ONLY
PART OF 3W3925, 3W3935, 5G9307 & 5G9311 HYDRAULIC ARS
AN ATTACHMENT
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-0741 | [6] | SEAL-LIP TYPE | |
| 2. | 3W-3989 | [1] | SHAFT | |
| 3. | 8T-0798 | [2] | BEARING-ROLLER | |
| 4. | 1B-8704 | [4] | KEY-WOODRUFF | |
| 5. | 3T-8118 | [1] | SHAFT | |
| 6. | 4J-3044 | [2] | BEARING-NEEDLE | |
| 7. | 2A-1736 | [1] | HANDLE | |
| 8. | 0L-1351 | [2] | BOLT | |
| 5M-2894 | [2] | WASHER | ||
| 9. | 3T-9345 | [1] | BRACKET | |
| 10. | 5J-5315 | [2] | ROD END | |
| 2L-6267 | [2] | LOCKNUT | ||
| 11. | 3K-5744 | [1] | ROD-CONTROL | |
| 1B-4203 | [2] | NUT-FULL | ||
| 12. | 9G-1240 | [1] | SEAL | |
| 13. | 2J-7295 | [1] | SPRING | |
| 14. | 6P-5208 | [1] | GUIDE-CONTROL | |
| 15. | 6P-5207 | [1] | SEAL-DOMED | |
| 16. | 3W-0432 | [1] | SUPPORT | |
| 17. | 3W-3988 | [1] | LEVER | |
| 18. | 0S-1591 | [1] | BOLT | |
| 1D-4717 | [1] | NUT |
#HEBP16790362
9W-9057: CYLINDER AR-TILT
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS#HEBP16790363
9T-6095: CYLINDER GP-TILT
9T6095 CYLINDER GP
152-MM (6-IN) BORE X 105-MM (4-IN) STROKE
PART OF 9W9057 CYLINDER AR-TILT
AN ATTACHMENT
152-MM (6-IN) BORE X 105-MM (4-IN) STROKE
PART OF 9W9057 CYLINDER AR-TILT
AN ATTACHMENT
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-6094 R | [1] | CYLINDER AS | |
| 2. | 2J-8489 | [1] | BEARING | |
| 3. | 5J-5731 | [1] | NUT-SELF LOCKING | |
| 4. | 9T-6087 | [1] | WASHER | |
| 5. | 1J-0708 | [1] | RING-WEAR | |
| 6. | 9T-8218 | [1] | HEAD | |
| 7. | 2K-3258 | [1] | RING-BACK-UP | |
| 8. | 5H-3252 | [1] | SEAL-O-RING | |
| 9. | 9T-6093 R | [1] | ROD-PISTON | |
| 10. | 5P-8167 | [4] | BOLT | |
| 11. | 9T-6092 | [1] | PISTON AS | |
| 12. | 5J-4989 | [1] | SEAL AS | |
| 13. | 1K-6982 | [1] | SEAL-LIP TYPE | |
| 14. | 5J-0964 | [1] | SEAL-U-CUP | |
| 15. | 5J-3620 | [1] | SEAL-RING | |
| 16. | 1D-4627 | [4] | BOLT | |
| 5P-8249 | [4] | WASHER | ||
| 17. | 2K-1845 | [2] | COVER | |
| 2D-0092 | [2] | GASKET | ||
| R | REMFG PART MAY BE AVAILABLE | |||
#HEBP16790364
1U-3989: CYLINDER GP-DOZER LIFT
1U3989 CYLINDER GP-DOZER LIFT
95.25 MM (3.75") BORE X 1262 MM (49.61") STROKE
BULLDOZER S/N 3TH1-UP, 4NH1-UP & 5CH1-UP
PART OF 4T4415, 4T4367 & 1U2392 BULLDOZER AR
AN ATTACHMENT
95.25 MM (3.75") BORE X 1262 MM (49.61") STROKE
BULLDOZER S/N 3TH1-UP, 4NH1-UP & 5CH1-UP
PART OF 4T4415, 4T4367 & 1U2392 BULLDOZER AR
AN ATTACHMENT
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-4762 C | [1] | HEAD | |
| 2. | 1F-6762 | [1] | BOLT | |
| 3. | 1U-4738 | [1] | WASHER | |
| 4. | 5J-8019 J | [1] | RING-WEAR | |
| 5. | 8C-3839 C | [1] | SEAL AS | |
| 6. | 9T-3884 | [1] | PISTON AS | |
| 7. | 2H-4145 J | [1] | SEAL-O-RING | |
| 8. | 1S-0669 J | [1] | RING (BACK UPPER) | |
| 9. | 5J-8011 | [1] | SEAL AS | |
| 10. | 1U-4081 R | [1] | ROD AS | |
| 11. | 3J-6572 | [12] | SHIM .5MM(.02IN)THK | |
| 12. | 4J-0121 | [1] | CAP-BEARING | |
| 13. | 0S-1756 | [4] | BOLT | |
| 14. | 1B-4331 | [4] | NUT (FULL) | |
| 15. | 1U-4079 | [1] | CROWN | |
| 16. | 8C-3840 C | [1] | SEAL-LIP TYPE | |
| 17. | 5J-0964 J | [1] | SEAL-U-CUP | |
| 18. | 1U-4086 R | [1] | CYLINDER AS | |
| 19. | 4J-6374 | [2] | BEARING-SLEEVE | |
| 20. | 8T-5668 | [1] | RING-WEAR | |
| THE FOLLOWING REPAIR | ||||
| KIT IS AVAILABLE: | ||||
| 8T-3015 | [1] | KIT-SEAL (INCL PARTS MARKED J) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMFG PART MAY BE AVAILABLE | |||
#HEBP16790365
1U-3991: CYLINDER GP-TILT
1U3991 CYLINDER GP-TILT-BLADE (CHANGE 05)
165.1 MM (6.5") BORE X 127 MM (5") STROKE
BULLDOZER S/N 3TH1-UP & 5CH1-UP
PART OF 6Y0949 ARM-PUSH. AN ATTACHMENT
165.1 MM (6.5") BORE X 127 MM (5") STROKE
BULLDOZER S/N 3TH1-UP & 5CH1-UP
PART OF 6Y0949 ARM-PUSH. AN ATTACHMENT
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-0934 | [1] | CYLINDER AS | |
| 2. | 2J-8489 | [1] | BEARING | |
| 3. | 3S-6162 | [1] | WASHER-HARD | |
| 4. | 3J-9703 | [1] | RING-WEAR | |
| 5. | 4T-0259 | [1] | PISTON | |
| 6. | 5J-4991 | [1] | SEAL AS | |
| 7. | 1U-4069 | [1] | ROD AS | |
| 8. | 2K-4473 | [1] | RING-BACK-UP | |
| 9. | 2K-4472 | [1] | SEAL-O-RING | |
| 10. | 8C-9126 | [1] | SEAL AS | |
| 11. | 9T-0095 | [1] | HEAD | |
| 12. | 1D-4709 | [4] | BOLT | |
| 5P-8250 | [4] | WASHER | ||
| 13. | 5J-8300 | [1] | SEAL-U-CUP | |
| 14. | 8C-5218 | [1] | SEAL-LIP TYPE | |
| 15. | 7X-0373 | [4] | BOLT | |
| 1B-4331 | [4] | NUT | ||
| 16. | 8J-2880 | [1] | CAP-BEARING | |
| 17. | 3J-6572 | [12] | SHIM .5MM(.02IN)THK | |
| 18. | 9T-0094 | [1] | RING-WEAR | |
| 19. | 6V-2710 | [1] | BOLT-SELF LOCKING |
#HEBP16790366
9T-2716: CYLINDER GP-RIPPER LIFT
9T2716 CYLINDER GP-RIPPER LIFT (CHANGE 00)
127 MM (5") BORE X 362 MM (14.25") STROKE
TYPE 1. RIPPER S/N 3SH1-UP
PART OF 9W0804 RIPPER AR
AN ATTACHMENT
127 MM (5") BORE X 362 MM (14.25") STROKE
TYPE 1. RIPPER S/N 3SH1-UP
PART OF 9W0804 RIPPER AR
AN ATTACHMENT
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-1753 | [1] | PISTON | |
| 2. | 4J-3420 | [1] | RING-WEAR | |
| 3. | 5J-5020 | [1] | SEAL AS | |
| 4. | 9T-2715 | [1] | CYLINDER AS | |
| 5. | 4K-3128 | [2] | BEARING-SLEEVE | |
| 6. | 6J-9739 | [1] | HEAD | |
| 7. | 5J-3620 | [1] | SEAL-RING | |
| 8. | 5J-0964 | [1] | SEAL-U-CUP | |
| 9. | 1K-6982 | [1] | SEAL-LIP TYPE | |
| 10. | 9T-2714 | [1] | ROD AS | |
| 11. | 2K-4507 | [1] | BEARING-SLEEVE | |
| 12. | 1D-4628 | [4] | BOLT | |
| 5P-8249 | [4] | WASHER | ||
| 13. | 2K-4096 | [1] | RING | |
| 14. | 5F-3144 | [1] | SEAL-O-RING | |
| 15. | 3G-1757 | [1] | WASHER | |
| 16. | 2J-0564 | [1] | NUT-SELF LOCKING |
#HEBP16790367
9T-2716: CYLINDER GP-RIPPER LIFT
9T2716 CYLINDER GP-RIPPER LIFT (CHANGE 01)
127 MM (5") BORE X 362 MM (14.25") STROKE
TYPE 2. RIPPER S/N 3SH1-UP
PART OF 9W0804 RIPPER AR
AN ATTACHMENT
127 MM (5") BORE X 362 MM (14.25") STROKE
TYPE 2. RIPPER S/N 3SH1-UP
PART OF 9W0804 RIPPER AR
AN ATTACHMENT
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-1753 | [1] | PISTON | |
| 2. | 4J-3420 | [1] | RING-WEAR | |
| 3. | 5J-5020 | [1] | SEAL AS | |
| 4. | 9T-2715 | [1] | CYLINDER AS | |
| 5. | 4K-3128 | [2] | BEARING-SLEEVE | |
| 6. | 9T-6863 C | [1] | HEAD | |
| 7. | 8C-3839 | [1] | SEAL AS | |
| 8. | 5J-0964 | [1] | SEAL-U-CUP | |
| 9. | 8C-3840 | [1] | SEAL-LIP TYPE | |
| 10. | 9T-2714 | [1] | ROD AS | |
| 11. | 2K-4507 | [1] | BEARING-SLEEVE | |
| 12. | 1D-4628 | [4] | BOLT | |
| 5P-8249 | [4] | WASHER | ||
| 13. | 2K-4096 | [1] | RING | |
| 14. | 5F-3144 | [1] | SEAL-O-RING | |
| 15. | 3G-1757 | [1] | WASHER | |
| 16. | 2J-0564 | [1] | NUT-SELF LOCKING | |
| 17. | 8T-5668 C | [1] | RING-WEAR | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#HEBP16790368
3G-9451: MOUNTING GP-CYLINDER
3G9451 MOUNTING GP-CYLINDER
TYPE 1. BULLDOZER S/N 3TH1-UP, 4NH1-UP & 5CH1-UP
PART OF 4T4415, 4T4367 & 1U2392 BULLDOZER AR
AN ATTACHMENT
TYPE 1. BULLDOZER S/N 3TH1-UP, 4NH1-UP & 5CH1-UP
PART OF 4T4415, 4T4367 & 1U2392 BULLDOZER AR
AN ATTACHMENT
For full view, you need register
#HEBP16790369
3G-9451: MOUNTING GP-CYLINDER
3G9451 MOUNTING GP-CYLINDER
TYPE 2. BULLDOZER S/N 3TH1-UP, 4NH1-UP & 5CH1-UP
PART OF 4T4415, 4T4367 & 1U2392 BULLDOZER AR
AN ATTACHMENT
TYPE 2. BULLDOZER S/N 3TH1-UP, 4NH1-UP & 5CH1-UP
PART OF 4T4415, 4T4367 & 1U2392 BULLDOZER AR
AN ATTACHMENT
For full view, you need register
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-4875 | [2] | PIN | |
| 2. | 3B-8489 | [2] | FITTING-GREASE | |
| 3. | 5M-3062 C | [2] | BOLT | |
| 8T-2561 | [2] | WASHER | ||
| 4. | 7X-0358 | [8] | BOLT | |
| 5. | 6Y-2658 | [2] | YOKE | |
| 6. | 5P-2671 | [2] | SEAL-LIP TYPE | |
| 7. | 6Y-9280 C | [2] | CLAMP (TAB) | |
| 6Y-9281 C | [2] | CLAMP (SLOT) | ||
| 8. | 5P-8248 C | [2] | WASHER-HARD | |
| 9. | 8T-4835 C | [2] | BOLT | |
| 10. | 8T-4223 C | [4] | WASHER | |
| 11. | 6V-8188 C | [2] | NUT | |
| 12. | 9N-4233 C | [2] | STRAP | |
| 13. | 3G-9405 | [4] | CAP AS | |
| (EACH INCLUDES) | ||||
| 14. | 3G-9402 | [1] | BEARING-SLEEVE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
Information:
Caterpillar Parts SIS Catalog D6H :
Truck sale:
38,000
