4W2197 CRANKSHAFT GP 214B EXCAVATOR

BASIC ENGINE

CRANKSHAFT GP

0. 4W-2197 CRANKSHAFT

PISTON & ROD GP

1. 4W-3652 PISTON & R
2. 7C-4479 PISTON GP
3. 9Y-5538 PISTON & R

CRANKSHAFT GP

4. 4W-1016 SEAL GP-CR

CYLINDER BLOCK GP

5. 7C-0299 COVER GP-C
6. 7C-0299 COVER GP-C
7. 4W-2108 COVER GP-C

CYLINDER HEAD GP

8. 4W-1099 CYLINDER H
9. 4W-0737 CYLINDER H
0. INFORMATION

EXCAVATOR 214B EXCAVATOR 4CF
214B & 214BFT EXCAVATORS WHEEL TYPE 4CF00001-UP (MACHINE) POWERED BY 3116 ENGINE HEBP1719 214B 4CF (1988)

BASIC ENGINE

CRANKSHAFT GP

4W-2197 CRANKSHAFT GP

4W-1016 SEAL GP-CRANKSHAFT

#HEBP17190010

4W-2197: CRANKSHAFT GP

CRANKSHAFT GP

4W2197 CRANKSHAFT GP

c563825 HEBP1719

For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	271-5658	[1]	CRANKSHAFT AS
1A.	1B-8705	[1]	KEY-WOODRUFF
1B.	2W-8147	[1]	GEAR (50-TEETH)
2.	212-4893	[1]	BEARING-THRUST
	229-5153 AB		BEARING-THRUST (0.25-MM US)
	229-5154 AB		BEARING-THRUST (0.5-MM US)
	229-5155 AB		BEARING-THRUST (0.5-MM OS)
	229-5156 AB		BEARING-THRUST (0.5-MM OS, 0.5-MM US)
3.	107-7708	[6]	BEARING-MAIN
	145-0162 AB		BEARING-MAIN (0.25-MM US)
	145-0164 AB		BEARING-MAIN (0.5-MM US)
	145-0168 AB		BEARING-MAIN (0.5-MM OS)
	145-0170 AB		BEARING-MAIN (0.5-MM OS - 0.5-MM US)
	7C-7980 AF	[1]	SLEEVE-OIL SEAL
			(THIS WEAR SLEEVE
			IS USED ONLY TO
			SALVAGE (REPAIR) THE
			REAR SEAL SURFACE
			OF THE CRANKSHAFT)
			AVAILABLE REPAIR KIT(S):
	196-9519	[1]	BEARING GP-MAIN (CRANKSHAFT)
			(INCLUDES A COMPLETE SET OF STANDARD MAIN AND THRUST BEARINGS)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN

#HEBP17190011

4W-3652: PISTON & ROD GP

PISTON & ROD GP

4W3652 PISTON & ROD GP
7C4479-Page 8

c414477 HEBP1719

For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-4479 Y	[1]	PISTON GP
2.	7C-0115	[1]	PIN-PISTON
3.	7W-9415	[1]	BEARING-CONNECTING ROD
	7C-6976 A	[1]	BEARING
	7C-6977 A	[1]	BEARING
	A	[1]	BEARING-.75MM U.S.
4.	7C-0111	[2]	RETAINER-PIN
5.	2W-9128 R	[1]	ROD AS-CONNECTING
6.	9N-3832	[2]	BOLT-CONNECTING ROD
7.	9L-7669	[2]	NUT-CONNECTING ROD
8.	2W-0027	[1]	BEARING
	A		NOT PART OF THIS GROUP
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#HEBP17190012

7C-4479: PISTON GP

PISTON GP

7C4479 PISTON GP
Part Of 4W3652 Piston & Rod

c521753 HEBP1719

For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-5668	[1]	BODY AS-PISTON
2.	7C-0260	[1]	RING-PISTON (TOP)
3.	7C-4111	[1]	RING-PISTON (INTERMEDIATE)
4.	7C-5232	[1]	RING-PISTON (OIL REGULATOR)

#HEBP17190013

9Y-5538: PISTON & ROD GP

PISTON & ROD GP

9Y5538 PISTON & ROD GP

c490099 HEBP1719

For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-7452	[1]	BODY AS-PISTON
2.	7C-0115	[1]	PIN-PISTON
3.	7W-9415	[1]	BEARING-CONNECTING ROD
	7C-6976 A	[1]	BEARING (.010 IN)US
	7C-6977 A	[1]	BEARING (.020 IN)US
4.	7C-0111	[1]	RETAINER-PIN
5.	2W-9128 R	[1]	ROD AS-CONNECTING
6.	9N-3832	[2]	BOLT-CONNECTING ROD
7.	9L-7669	[2]	NUT-CONNECTING ROD
8.	2W-0027	[1]	BEARING
9.	7C-0260	[1]	RING-PISTON
10.	7E-5786	[1]	RING-PISTON
11.	7C-5232	[1]	RING-PISTON
	A		NOT PART OF THIS GROUP
	R		REMFG PART MAY BE AVAILABLE

#HEBP17190014

4W-1016: SEAL GP-CRANKSHAFT

SEAL GP-CRANKSHAFT

4W1016 SEAL GP-CRANKSHAFT

c406537 HEBP1719

For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	7C-3570	[1]	SEAL GP-CRANKSHAFT
2.	7C-4163	[1]	SEAL GP-CRANKSHAFT

#HEBP17190015

7C-0299: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

7C0299 COVER GP-CYLINDER BLOCK
Type 1. Engine S/N 4TF1-565

c460532 HEBP1719

7C0299 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-2317 M	[11]	BOLT
2.	9M-1974	[26]	WASHER
3.	7W-3872	[6]	SLEEVE
4.	7W-3871	[2]	COVER-SIDE
5.	7W-9699	[3]	GASKET
6.	7W-9395 C	[1]	COVER-SIDE
7.	6V-5217 M	[15]	BOLT
8.	2W-6544	[1]	COVER
	7W-2426	[1]	GASKET
9.	6V-5842 CM	[2]	BOLT
	6V-5839 C	[2]	WASHER
10.	9Y-0747 C	[1]	MANIFOLD-OIL
11.	4F-9653	[1]	SEAL-O-RING
12.	9S-4191 C	[3]	PLUG-O-RING
	3J-1907 C	[3]	SEAL
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#HEBP17190016

7C-0299: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

7C0299 COVER GP-CYLINDER BLOCK
Type 2. Engine S/N 4TF1-565

c571871 HEBP1719

For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-2317 M	[12]	BOLT
2.	9M-1974	[23]	WASHER-HARD
3.	7W-3872	[6]	SLEEVE
4.	7W-3871	[2]	COVER-SIDE
5.	7W-9699	[3]	GASKET
6.	7W-9395	[1]	COVER-SIDE
7.	6V-5217 M	[11]	BOLT
8.	2W-6544	[1]	COVER
	1U-8846 B		LIQUID GASKET
9.	9S-4191 C	[3]	PLUG-O-RING
10.	3J-1907 C	[3]	SEAL-O-RING (SMALL)
11.	4F-9653	[1]	SEAL-O-RING (LARGE)
12.	9Y-0747 C	[1]	MANIFOLD-OIL
13.	6V-5842 MC	[2]	BOLT
14.	6V-5839 C	[2]	WASHER
15.	110-7618	[4]	BOLT AS
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#HEBP17190017

4W-2108: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

4W2108 COVER GP-CYLINDER BLOCK

c580979 HEBP1719

For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-2317 M	[10]	BOLT
2.	9M-1974	[20]	WASHER-HARD
3.	7W-3872	[6]	SLEEVE
4.	7W-3871	[3]	COVER-SIDE
5.	7W-9699	[3]	GASKET
6.	4F-9653	[1]	SEAL-O-RING (LARGE)
7.	6V-5217 M	[10]	BOLT
8.	2W-6544	[1]	COVER
9.	9S-4191	[3]	PLUG-O-RING
10.	3J-1907	[3]	SEAL-O-RING (SMALL)
11.	9Y-0747	[1]	MANIFOLD-OIL
12.	6V-5842 M	[2]	BOLT
13.	6V-5839	[2]	WASHER
14.	6V-2317 BM	[2]	BOLT
	9M-1974	[2]	WASHER-HARD
15.	6V-5217 BM	[1]	BOLT
	9M-1974	[1]	WASHER-HARD
16.	110-7618	[4]	BOLT AS
17.	1U-8846		LIQUID GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#HEBP17190018

4W-1099: CYLINDER HEAD GP

CYLINDER HEAD GP

4W1099 CYLINDER HEAD GP
Engine S/N 4TF1-744
4W0737-Page 11

c522648 HEBP1719

For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-9671	[3]	SEAL-O-RING
2.	4W-0737 RY	[1]	CYLINDER HEAD GP
3.	8T-0657 M	[14]	BOLT
4.	8T-3282	[14]	WASHER-HARD
5.	2M-6471	[2]	PLUG-CUP
6.	7W-9956	[1]	GASKET-CYLINDER HEAD
			(1.60MM THK)
	4P-2590 AB	[1]	GASKET-CYLINDER HEAD
			(1.85MM THK)
7.	8T-5030 M	[6]	BOLT
8.	9S-8003	[3]	PLUG-O-RING
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	M		METRIC PART
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#HEBP17190019

4W-0737: CYLINDER HEAD GP

CYLINDER HEAD GP

4W0737 CYLINDER HEAD GP*R
Type 1. Engine S/N 4TF1-744
Part Of 4W1099 Cylinder Head
For Field Replacement Of 7W3278 Order 9Y6166-Page 11.02

c405776 HEBP1719

For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-3278	[1]	CYLINDER HEAD AS
2.	1W-2713	[6]	INSERT-VALVE SEAT
3.	7W-8065	[6]	INSERT-SEAT
4.	7W-5749	[6]	SLEEVE
5.	8M-5860	[6]	PLUG-CUP
6.	7W-8064	[6]	VALVE-INLET
7.	7W-2699	[6]	VALVE-EXHAUST
8.	1W-2715	[24]	LOCK-RETAINER
9.	7W-5202	[12]	RETAINER-VALVE SPRING
10.	7C-4273	[12]	SPRING-VALVE
11.	7C-7448 C	[6]	SEAL-VALVE STEM
12.	2W-5358 C	[12]	GUIDE-VALVE
	C		CHANGE FROM PREVIOUS TYPE

Information:

BASIC ENGINE

CRANKSHAFT GP

Special Instruction

Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}

115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}

Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}

Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}

Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Reuse And Salvage Guidelines

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Testing and Adjusting

Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines

Main Bearings - Inspect
3114, 3116, and 3126 Engines

Disassembly and Assembly

Vibration Damper, Pulley and Crankshaft Front Seal
3116 DIESEL ENGINE SUPPLEMENT FOR 213B AND 214B EXCAVATORS

Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft Front Seal - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft Front Seal - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft Rear Seal - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft Rear Seal - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft Wear Sleeve (Rear) - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft Wear Sleeve (Rear) - Remove - If Equipped
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

Crankshaft Failures{1202,1230}
1983/11/21

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06

New Rear Crankshaft Seal Groups Available{1161}
1994/10/17

Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/07

Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09

New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17

New Main Bearing Material{1203}
1999/05/24

Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2000/09/11

There Is a New Maximum Temperature for 2W-8147 Gear {1204}
2003/08/04

40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 214B :

2W-9608 CAMSHAFT GP-SINGLE

7C-5826 CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP

7W-9478 ENGINE AR

7C-1135 ENGINE AR

7C-1686 ENGINE AR

4W-3652 PISTON & ROD GP

7C-4479 PISTON GP

9Y-5538 PISTON & ROD GP

4W-1016 SEAL GP-CRANKSHAFT

7C-0299 COVER GP-CYLINDER BLOCK

4W-2108 COVER GP-CYLINDER BLOCK

4W-1099 CYLINDER HEAD GP

Truck sale:

CATERPILLAR 214B 1994
- WHEEL EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus

USD $14,500

1993 CAT 214B

Five Star Equipment Inc
Kirkwood, New York

7026 - CAT 214B

avspare

1997 CAT 214B

Rebel Auction
Georgia

CAT 214B

JM WOOD AUCTION COMPANY, INC
Montgomery, Alabama