AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P1582 GOVERNOR GP-UNIT INJECTOR Engine S/N 4TF1159-Up. Replaced By 4P4777-Page 45.04.01 4P0666-Page 45.05 Part Of 9Y4148 Governor-Unit Injector 214B


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL

EXCAVATOR 214B EXCAVATOR 4CF
 214B & 214BFT EXCAVATORS WHEEL TYPE 4CF00001-UP (MACHINE) POWERED BY 3116 ENGINE HEBP1719 214B 4CF   (1988)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
7C-6951 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
7C-4022 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-1582 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-4777 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
DRIVE GP-GOV & TRANSFER PUMP
4P-0666 DRIVE GP-GOV & TRANSFER PUMP
 

#HEBP17190110
 

4P-1582: GOVERNOR GP-UNIT INJECTOR

4P1582 GOVERNOR GP-UNIT INJECTOR
Engine S/N 4TF1159-Up. Replaced By 4P4777-Page 45.04.01
4P0666-Page 45.05
Part Of 9Y4148 Governor-Unit Injector
c511609 HEBP1719
4P1582 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 7C-3765 [1] SHAFT AS-OUTPUT  
3. 7C-8854 [1] PIN-CLEVIS  
4. 3C-6970 M [3] NUT  
5. 9X-6002 M [1] SETSCREW  
6. 8T-5435 M [1] BOLT  
7. 7C-4483 [1] SCREEN AS  
8. 8T-0269 M [3] BOLT-SOCKET HEAD  
9. 7C-5236 [1] COVER-REAR  
10. 7C-2363 B [7] SHIM (.25MM THK)  
11. 7C-2364 [1] WASHER  
12. 6V-5100 [1] SEAL-O-RING  
13. 8T-6702 M [1] SETSCREW-SOCKET  
14. 7C-6204 [1] PLUG  
15. 3T-0849 M [6] BOLT-SOCKET HEAD  
16. 7W-5562 [1] HOUSING AS-REAR  
17. Z [1] SHAFT  
18. Z [1] PLUG  
19. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
20. 9Y-8866 [1] LEVER AS-LIMIT  
21. Z [1] PIN  
22. Z [1] LEVER  
23. 8T-7060 [1] RING-RETAINING  
24. 7W-4313 [1] WASHER  
25. 7W-9527 [1] SPRING-TORSION  
26. 8T-5447 [2] RING-RETAINING  
27. 4P-4983 [1] SLEEVE  
28. 9Y-1837 [1] SPRING  
29. 7W-5572 [1] SLEEVE-LIMITING  
30. 7C-8640 [1] SPRING-CAM  
31. 7C-6592 [1] ARBOR AS-TORQUE CAM  
32. 7W-5608 [1] BLOCK AS-BEARING  
33. 6F-5933 [2] BEARING-NEEDLE  
34. 7W-5560 [1] LEVER AS-RISER  
35. Z [1] SWIVEL  
36. 8C-8580 M [2] BOLT-SOCKET HEAD  
37. 3P-3547 [1] RING-RETAINING  
38. 7C-0797 [1] LEVER AS-SHAFT  
39. Z [1] PIN  
40. Z [2] SWIVEL  
41. Z [1] LEVER  
42. 7W-5594 [1] SHAFT AS-PIVOT  
43. 8C-5899 [1] PIN-SPRING  
44. 7C-5480 [1] SPRING-TORSION  
45. 4P-0666 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
46. 7C-5150 [1] PIN  
47. 7C-5149 [1] SHAFT-RISER  
48. 7C-5148 [1] CARRIER-FLYWEIGHT  
49. 2S-7316 [4] DOWEL  
50. 7C-5541 [4] TOE-FLYWEIGHT  
51. 7W-8993 [4] WEIGHT  
52. 8C-8545 M [4] BOLT-SOCKET HEAD  
53. 6V-7699 [4] WASHER-HARD  
54. 8C-8546 M [9] BOLT-SOCKET HEAD  
55. 8C-5061 [1] RING-RETAINING  
56. 7C-2743 [2] RACE  
57. 7W-5561 [1] BEARING-THRUST  
58. 7W-1440 B [8] SHIM (.12MM THK)  
59. 7W-5583 [1] RISER  
60. 7C-2421 [1] SEAT AS-SPRING  
61. Z [1] INSERT  
62. 8C-6775 M [1] SETSCREW-SOCKET  
63. 9X-2315 [1] RING-RETAINING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#HEBP17190111
 

4P-4777: GOVERNOR GP-UNIT INJECTOR

4P4777 GOVERNOR GP-UNIT INJECTOR
Engine S/N 4TF1159-2992
4P4775-Page 45.07
Part Of 9Y4148 Governor-Unit Injectior
c512221 HEBP1719
4P4777 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 7C-3765 [1] SHAFT AS-OUTPUT  
3. 7C-8854 [1] PIN-CLEVIS  
4. 3C-6970 M [3] NUT  
5. 9X-6002 M [1] SETSCREW  
6. 8T-5435 M [1] BOLT  
7. 7C-4483 [1] SCREEN AS  
8. 8T-0269 M [3] BOLT-SOCKET HEAD  
9. 7C-5236 [1] COVER-REAR  
10. 7C-2363 B [7] SHIM (.25MM THK)  
11. 7C-2364 [1] WASHER  
12. 6V-5100 [1] SEAL-O-RING  
13. 8T-6702 M [1] SETSCREW-SOCKET  
14. 7C-6204 [1] PLUG  
15. 3T-0849 M [6] BOLT-SOCKET HEAD  
16. 7W-5562 [1] HOUSING AS-REAR  
17. Z [1] SHAFT  
18. Z [1] PLUG  
19. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
20. 9Y-8866 [1] LEVER AS-LIMIT  
21. Z [1] PIN  
22. Z [1] LEVER  
23. 8T-7060 [1] RING-RETAINING  
24. 7W-4313 [1] WASHER  
25. 7W-9527 [1] SPRING-TORSION  
26. 8T-5447 [2] RING-RETAINING  
27. 4P-4983 [1] SLEEVE  
28. 9Y-1837 [1] SPRING  
29. 7W-5572 [1] SLEEVE-LIMITING  
30. 7C-8640 [1] SPRING-CAM  
31. 7C-6592 [1] ARBOR AS-TORQUE CAM  
32. 7W-5608 [1] BLOCK AS-BEARING  
33. 6F-5933 [2] BEARING-NEEDLE  
34. 7W-5560 [1] LEVER AS-RISER  
35. Z [1] SWIVEL  
36. 8C-8580 M [2] BOLT-SOCKET HEAD  
37. 3P-3547 [1] RING-RETAINING  
38. 7C-0797 [1] LEVER AS-SHAFT  
39. Z [1] PIN  
40. Z [2] SWIVEL  
41. Z [1] LEVER  
42. 7W-5594 [1] SHAFT AS-PIVOT  
43. 8C-5899 [1] PIN-SPRING  
44. 7C-5480 [1] SPRING-TORSION  
45. 4P-4775 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
46. 7C-5150 [1] PIN  
47. 4P-0717 [1] SHAFT-RISER  
48. 7C-5148 [1] CARRIER-FLYWEIGHT  
49. 2S-7316 [4] DOWEL  
50. 7C-5541 [4] TOE-FLYWEIGHT  
51. 7W-8993 [4] WEIGHT  
52. 8C-8545 M [4] BOLT-SOCKET HEAD  
53. 6V-7699 [4] WASHER-HARD  
54. 8C-8546 M [9] BOLT-SOCKET HEAD  
55. 8C-5061 [1] RING-RETAINING  
56. 7C-2743 [2] RACE  
57. 7W-5561 [1] BEARING-THRUST  
58. 7W-1440 B [8] SHIM (.12MM THK)  
59. 7W-5583 [1] RISER  
60. 7C-2421 [1] SEAT AS-SPRING  
61. Z [1] INSERT  
62. 8C-6775 M [1] SETSCREW-SOCKET  
63. 9X-2315 [1] RING-RETAINING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#HEBP17190112
 

100-6179: GOVERNOR GP-UNIT INJECTOR

1006179 GOVERNOR GP-UNIT INJECTOR
Type 2. Engine S/N 4TF4179-Up
7E8794-Page 43.06.07
Part Of 4P5726 Governor-Unit Injector
c560877 HEBP1719
1006179 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 4P-5676 [1] CLEVIS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 104-7039 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 7E-3215 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 7C-6592 [1] ARBOR AS-TORQUE CAM  
24. 8C-6775 M [1] SETSCREW-SOCKET  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 7E-0155 [1] SCREEN AS-FUEL INLET  
35. 6V-8189 [1] NUT  
36. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD  
38. 7W-4313 [1] WASHER  
39. 6I-4514 [1] HOUSING AS  
40. Z [1] SHAFT  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET  
43. 5C-2874 M [2] NUT  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD  
48. 4P-3539 [1] LEVER-THROTTLE  
49. 8T-5435 M [1] BOLT  
50. 101-7676 [1] SETSCREW-HEX HEAD  
51. 7C-4483 [1] SCREEN AS  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. Z [1] PLUG  
55. 4P-3537 [1] RING-TOLERANCE  
56. 8T-0269 M [3] BOLT-SOCKET HEAD  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD  
64. 8C-8545 M [4] BOLT-SOCKET HEAD  
65. 7C-5541 [2] TOE-FLYWEIGHT  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM  
80. 7C-5885 [1] WASHER  
81. 4P-4000 [1] SPRING-LEVER  
82. 7C-6205 [1] PLUG  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#HEBP17190113
 

4P-0666: DRIVE GP-GOV & TRANSFER PUMP

4P0666 DRIVE GP-GOVERNOR & TRANSFER PUMP
Engine S/N 4TF1103-Up. Replaced By 4P4775-Page 45.07
Part Of 4P1581 & 4P1582 Governor-Unit Injector
c497459 HEBP1719
4P0666 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-8598 [1] RING-RETAINING  
2. 7W-9526 [1] SPRING-TORSION  
3. 7W-5568 [1] SHAFT AS-THROTTLE  
4. 6V-5213 M [2] BOLT-SOCKET HEAD  
5. 7C-5593 [1] SPRING-THROTTLE BIAS  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 7W-5621 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD  
12. 7W-7381 [1] FITTING-OUTLET  
13. 3J-1907 [2] SEAL  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7W-5571 [1] LEVER-CONTROL  
16. 8T-7050 M [1] SETSCREW-SOCKET  
17. 4P-0665 [1] HOUSING AS-DRIVE  
18. 7S-6798 [1] SEAL-LIP TYPE  
19. 7S-5005 [2] DOWEL  
20. 2K-5830 [2] BEARING-NEEDLE  
21. 9Y-0208 [1] BUSHING  
22. 9Y-3107 M [1] BOLT  
23. 7X-4805 [6] SEAL-O-RING  
24. 7W-9638 [1] SHAFT AS-SHUT-OFF  
25. 7W-4328 [1] SPRING-SHUT-OFF  
26. 7W-9402 [1] LEVER-SHUT-OFF  
27. 7W-9403 [1] LEVER-SHUT-OFF  
28. 8C-5899 [1] PIN-SPRING  
29. 8T-5433 M [4] BOLT-SOCKET HEAD  
30. 7W-5615 [1] SLEEVE AS-PUMP  
  M   METRIC PART
 

#HEBP17190114
 

4P-4775: DRIVE GP-GOV & TRANSFER PUMP

4P4775 DRIVE GP-GOVERNOR & TRANSFER PUMP
Flexible Drive
Engine S/N 4TF1159-2992
Part Of 4P4777 & 4P4778 Governor-Unit Injectors
c499104 HEBP1719
4P4775 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-8598 [1] RING-RETAINING  
2. 7W-9526 [1] SPRING-TORSION  
3. 7W-5568 [1] SHAFT AS-THROTTLE  
4. 6V-5213 M [2] BOLT-SOCKET HEAD  
5. 7C-5593 [1] SPRING-THROTTLE BIAS  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 7W-5621 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD  
12. 7W-7381 [1] FITTING-OUTLET  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7W-5571 [1] LEVER-CONTROL  
16. 8T-7050 M [1] SETSCREW-SOCKET  
17. 4P-0665 [1] HOUSING AS-DRIVE  
18. 7S-6798 [1] SEAL-LIP TYPE  
19. 7S-5005 [2] DOWEL  
20. 2K-5830 [2] BEARING-NEEDLE  
21. 9Y-0208 [1] BUSHING  
22. 9Y-3107 M [1] BOLT  
23. 7X-4805 [6] SEAL-O-RING  
24. 7W-9638 [1] SHAFT AS-SHUT-OFF  
25. 7W-4328 [1] SPRING-SHUT-OFF  
26. 7W-9402 [1] LEVER-SHUT-OFF  
27. 7W-9403 [1] LEVER-SHUT-OFF  
28. 8C-5899 [1] PIN-SPRING  
29. 8T-5433 M [4] BOLT-SOCKET HEAD  
30. 7W-5615 [1] SLEEVE AS-PUMP  
  M   METRIC PART
 

#HEBP17190115
 

7W-8179: DRIVE GP-GOV & TRANSFER PUMP

7W8179 DRIVE GP-GOVERNOR & TRANSFER PUMP
Part Of 7C6951 & 7C4022 Governors
c483832 HEBP1719
7W8179 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [1] WASHER  
2. 8T-0276 MC [1] BOLT  
3. 9Y-7567 [1] SPRING-GOVERNOR DRIVE  
4. 9Y-0275 [1] COVER-GOVERNOR DRIVE  
5. 7W-9526 [1] SPRING-TORSION  
6. 7C-5593 [1] SPRING-THROTTLE BIAS  
7. 7W-9638 [1] SHAFT AS-SHUT-OFF  
8. ZC [1] LEVER-SHUT OFF  
9. ZC [1] LEVER-SHUT OFF  
10. ZC [1] PIN-SPRING  
11. 8T-5433 MC [4] BOLT-SOCKET HEAD  
12. 6V-5213 M [2] BOLT-SOCKET HEAD  
13. 9Y-0273 [1] GEAR AS-GOVERNOR DRIVE  
14. 9Y-3289 C [1] DOWEL  
15. 4D-9986 [2] SEAL-O-RING  
16. 7W-5619 [1] PISTON AS-PUMP  
17. 7W-7379 [1] FITTING-INLET  
18. 7W-5621 [1] COVER-TRANSFER PUMP  
19. 7C-5294 [1] SPRING  
20. 8C-6364 M [3] BOLT-SOCKET HEAD  
21. 7W-7381 [1] FITTING-OUTLET  
22. 3J-1907 [2] SEAL  
23. 7W-7383 [2] VALVE AS-CHECK  
24. 7W-5571 [1] LEVER-CONTROL  
25. 8T-7050 M [1] SETSCREW-SOCKET  
26. 6L-8598 [1] RING-RETAINING  
27. 7W-5568 [1] SHAFT AS-THROTTLE  
28. 7W-5615 [1] SLEEVE AS-PUMP  
29. 1W-0565 [1] RING-RETAINING  
30. 7W-5558 [1] HOUSING AS-GOVERNOR  
31. Z [1] CARRIER AS-DRIVE  
32. Z [1] DOWEL  
33. Z [2] BEARING-NEEDLE  
34. 7S-5005 [2] DOWEL  
35. 7S-6798 C [1] SEAL-LIP TYPE  
36. 9Y-0208 [1] BUSHING  
37. Z [1] SHAFT  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#HEBP17190116
 

7W-4812: FASTENER GP-GOVERNOR

7W4812 FASTENER GP-GOVERNOR
Part Of 7E7659 & 4P5795 Governor-Unit Injection
c476378 HEBP1719
7W4812 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 JC [1] SLEEVE  
2. 9M-1974 [3] WASHER  
3. 6V-5218 M [3] BOLT  
4. 9Y-5295 C [1] TUBE-GOVERNOR CONNECTION  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING  
   
    J-INSTALL SLEEVE
    IN FRONT HOUSING
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#HEBP17190117
 

7C-9651: LINES GP-FUEL FILTER

7C9651 LINES GP-FUEL FILTER
Type 1. Engine S/N 4TF1-922
c518487 HEBP1719
7C9651 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7934 [2] WASHER-HARD  
2. 6V-6317 M [2] BOLT  
3. 6V-8724 C [3] ELBOW  
4. 3J-1907 C [7] SEAL 11.9MM (.469IN) ID  
5. 8T-0640 M [2] BOLT  
6. 2J-6274 [1] SEAL-O-RING 9.12MM(.36IN) ID  
7. 7W-0032 [1] TUBE AS  
8. 7W-0183 [1] TUBE AS  
9. 9S-1350 [1] CLIP  
  6V-5215 M [1] BOLT  
  9M-1974 [1] WASHER  
10. 7C-5867 [1] SCREEN AS  
11. 7C-5866 [1] HOUSING-FUEL SCREEN  
12. 9S-8005 [1] PLUG-O-RING  
13. 3K-0360 [1] SEAL-O-RING 16.4MM (.646IN) ID  
14. 5F-7054 [1] SEAL-O-RING 18.6MM(.734IN) ID  
15. 6V-2317 M [2] BOLT  
16. 7C-5861 [1] TUBE AS  
17. 7C-7838 [1] VALVE AS  
18. 7W-7381 [1] FITTING-OUTLET  
19. 7C-5865 [1] ELBOW  
20. 7X-2459 C [1] TEE-SPECIAL  
  7J-1089 C [1] PLUG-O-RING SPECIAL  
21. 6V-8397 [4] SEAL-O-RING 9.25MM (.364IN) ID  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#HEBP17190118
 

7C-9651: LINES GP-FUEL FILTER

7C9651 LINES GP-FUEL FILTER
Type 2. Engine S/N 4TF1-922
c487798 HEBP1719
7C9651 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7934 [2] WASHER-HARD  
2. 6V-6317 M [2] BOLT  
3. 6V-8724 [3] ELBOW  
4. 3J-1907 [7] SEAL-O-RING 11.9MM (.469IN) ID  
5. 7E-0156 C [1] FITTING-INLET  
6. 6V-8397 [4] SEAL-O-RING 9.25MM (.364IN) ID  
7. 7W-0032 [1] TUBE AS  
8. 7W-0183 [1] TUBE AS  
9. 9S-1350 [1] CLIP  
  6V-5215 M [1] BOLT  
  9M-1974 [1] WASHER-HARD  
10. 7E-0155 C [1] SCREEN AS-FUEL INLET  
11. 7W-7381 [1] FITTING-OUTLET  
12. 7C-7838 [1] VALVE AS  
13. 7C-5861 [1] TUBE AS  
14. 5F-7054 [1] SEAL-O-RING 18.6MM(.734IN) ID  
15. 6V-2317 M [2] BOLT  
16. 7X-2459 C [1] TEE  
  7J-1089 C [1] PLUG-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#HEBP17190119
 

7C-9651: LINES GP-FUEL FILTER

7C9651 LINES GP-FUEL FILTER
Engine S/N 4TF923-1820
c483871 HEBP1719
7C9651 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 214B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7934 [2] WASHER-HARD  
2. 6V-6317 M [2] BOLT  
3. 6V-8724 C [2] ELBOW  
4. 3J-1907 [7] SEAL-O-RING 11.9MM (.469IN) ID  
5. 7E-0156 [1] FITTING-INLET  
6. 6V-8397 [4] SEAL-O-RING 9.25MM (.364IN) ID  
7. 7E-1460 C [1] TUBE AS  
8. 7W-0183 [1] TUBE AS  
9. 9S-1350 [1] CLIP  
  8T-4200 MC [1] BOLT  
  8T-4224 C [1] WASHER-HARD  
10. 7E-0155 [1] SCREEN AS-FUEL INLET  
11. 8T-0151 C [1] ADAPTER  
12. 7E-5189 C [1] VALVE-REGULATOR  
13. 7E-5190 C [1] TUBE AS  
14. 5F-7054 [1] SEAL-O-RING 18.6MM(.734IN) ID  
15. 8T-7547 MC [2] BOLT  
16. 7X-2459 [1] TEE  
  9S-4191 [1] PLUG-O-RING  
17. 5P-7813 C [1] SEAL-O-RING  
18. 3N-3252 C [1] SPRING  
19. 6V-8636 C [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Information Release Memo
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Refueling Pump
214B & 224B EXCAVATORS VEHICLE SYSTEMS
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
New Seal Used In Governor Fastener Group{1264}
1990/01/29
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
Engine Rack Control Assemblies Improved {1257}
1990/07/02
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Measuring "Dynamic Rack" Of Unit Injectors{0780}
1993/06/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06
Mechanical Unit Injector Identification Code{1290}
1995/12/18
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01
Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01
New Service Tool Calibration Pins For Mechanical Governed Engines{1264,1265}
1996/07/08
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog 214B :

GOVERNOR GP-UNIT INJECTOR
7C-4022 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
7C-6951 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-1581 GOVERNOR GP-UNIT INJECTOR
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
6I-0232 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP-UNIT INJECTOR
4P-5503 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
6I-0231 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5726 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-4777 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
DRIVE GP-GOV & TRANSFER PUMP
4P-0666 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
4P-4775 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7W-8179 DRIVE GP-GOV & TRANSFER PUMP
FASTENER GP-GOVERNOR
7W-4812 FASTENER GP-GOVERNOR
LINES GP-FUEL FILTER
7C-9651 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7C-9651 LINES GP-FUEL FILTER

Truck sale:

CATERPILLAR 214B 1994
 
CATERPILLAR 214B 1994
- WHEEL EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1993 CAT 214B
USD $14,500 
1993 CAT 214B

Five Star Equipment Inc
Kirkwood, New York
7026 - CAT 214B
 
7026 - CAT 214B

avspare
 
 
1997 CAT 214B

Rebel Auction
Georgia
 
 
CAT 214B

JM WOOD AUCTION COMPANY, INC
Montgomery, Alabama
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.