AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C5624 CARTRIDGE GP-TURBOCHARGER Part Of 7C2183 Turbocharger 213B EXCAVATOR


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUEL
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
ELECTRICAL AND STARTING SYSTEM
SOLENOID GP-SHUTOFF
SOLENOID GP

EXCAVATOR 213B EXCAVATOR 1EJ
 213B EXCAVATOR TRACK TYPE 1EJ00001-UP (MACHINE) POWERED BY 3116 ENGINE HEBP1743 213B 1EJ   (1988)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
1W-6030 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
1W-6030 LINES GP-TURBOCHARGER OIL
TURBOCHARGER GP
4W-2107 TURBOCHARGER GP
TURBOCHARGER GP
4W-2107 TURBOCHARGER GP
TURBOCHARGER GP
7C-2183 TURBOCHARGER GP
TURBOCHARGER GP
4P-4681 TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
7C-5624 CARTRIDGE GP-TURBOCHARGER
4P-4686 CARTRIDGE GP-TURBOCHARGER
 

#HEBP17430070
 

7C-5624: CARTRIDGE GP-TURBOCHARGER

7C5624 CARTRIDGE GP-TURBOCHARGER
Part Of 7C2183 Turbocharger
c533815 HEBP1743
7C5624 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5801 [1] NUT  
2. 7C-5625 [1] WHEEL-COMPRESSOR  
3. 7C-5800 [1] INSERT  
4. 7C-6658 [1] RING-RETAINING  
5. 7C-5828 [1] SEAL-O-RING  
6. 7C-5858 [1] BEARING-THRUST  
7. 7C-5825 [1] SLEEVE-FLINGER  
8. 7C-5856 [1] BACKPLATE-TURBINE  
9. 1N-3806 [1] RING-PISTON  
10. 7C-5627 [1] WHEEL AS-SHAFT & TURBINE  
11. 7C-5798 [2] BEARING  
12. 7C-6657 [4] RING-RETAINING  
13. 7C-6656 [1] WASHER-WEAR  
14. 7C-5827 [1] RING-THRUST  
15. 7C-6154 [1] SLEEVE-SPACER  
16. 7C-5859 [1] RING-PISTON  
17. 7C-6647 [1] HOUSING AS-BEARING  
18. 7C-6654 [1] PIN-SPRING  
 

#HEBP17430071
 

4P-4686: CARTRIDGE GP-TURBOCHARGER

4P4686 CARTRIDGE GP-TURBOCHARGER*R
Part Of 4P4681 Turbocharger
HEBP17430071 HEBP1743
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    NO SERVICEABLE PARTS
 

#HEBP17430072
 

1N-3476: FILTER GP-FUEL

1N3476 FILTER GP-FUEL
c549249 HEBP1743
1N3476 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 B [4] WASHER-HARD (2MM THK)  
2. 6V-9607 MB [2] BOLT (M8X1.25X120MM)  
3. 3J-1907 [1] SEAL-O-RING (15.85MM OD)  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT (M8X1.25X35MM)  
6. 1R-0750 [1] FILTER AS-FUEL  
7. 9S-4191 [1] PLUG-O-RING (9/16-18 THD)  
8. 4W-5158 [1] BASE AS  
9. 4N-3294 [1] INSERT-FUEL FILTER  
  B   USE AS REQUIRED
  M   METRIC PART
 

#HEBP17430073
 

7C-5799: PUMP GP-FUEL INJECTION

7C5799 PUMP GP-FUEL INJECTION
Engine S/N 4TF1-306
c455292 HEBP1743
7C5799 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-2642 [1] INJECTOR GP-FUEL  
2. 6V-6228 [1] SEAL-O-RING  
3. 3T-0849 M [1] BOLT-SOCKET HEAD  
  M   METRIC PART
 

#HEBP17430074
 

7C-1500: PUMP GP-FUEL INJECTION

7C1500 PUMP GP-FUEL INJECTION
Engine S/N 4TF307-905
c456457 HEBP1743
7C1500 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-0849 M [1] BOLT-SOCKET HEAD  
2. 9Y-4982 CR [1] INJECTOR GP-FUEL  
3. 6V-6228 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP17430075
 

7C-1500: PUMP GP-FUEL INJECTION

7C1500 PUMP GP-FUEL INJECTION
Engine S/N 4TF906-Up
c491158 HEBP1743
7C1500 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-0849 M [1] BOLT-SOCKET HEAD  
2. 7E-8727 R [1] INJECTOR GP-FUEL  
3. 6V-6228 [1] SEAL-O-RING  
4. 032-8970 [1] SEAL-O-RING  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP17430076
 

4P-0723: PUMP GP-FUEL PRIME & PRIM FLTR

4P0723 PUMP GP-FUEL PRIMING & PRIMARY FILTER
Engine S/N 4TF1361-Up
c561450 HEBP1743
4P0723 PUMP GP-FUEL PRIME & PRIM FLTR Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5839 [2] WASHER  
  6V-4248 M [2] BOLT  
2. 8W-3109 I [1] HOSE AS  
3. 067-2551 [2] CLAMP  
  6V-5218 M [2] BOLT  
  3E-4352 [2] WASHER-HARD  
4. 8H-2778 [1] GASKET  
5. 9M-2341 [1] ELEMENT AS  
6. 2J-0157 [1] SEAL-O-RING  
7. 9X-2134 [1] ELBOW-90 DEGREE  
  2M-9780 [1] SEAL-O-RING  
8. 4P-0724 [1] BRACKET  
9. 7H-9678 [1] RETAINER-ELEMENT  
10. 2H-3429 [1] RING-RETAINING  
11. 8N-8205 [1] BASE AS-FUEL FILTER  
  1W-3348 [1] BASE  
  7E-5346 [1] VALVE AS  
  9S-8003 [2] PLUG-O-RING  
  1J-9671 [2] SEAL-O-RING  
12. 1P-0436 [1] GASKET  
13. 105-2508 [1] PUMP AS-FUEL PRIMING  
14. 7B-2742 [1] BOLT  
  5P-0537 [1] WASHER  
15. 7S-9323 [1] SPRING  
16. 9M-1974 [3] WASHER-HARD  
17. 1B-7182 [1] BOLT  
18. 6V-3940 M [2] BOLT  
19. 5P-6944 [1] ADAPTER-STRAIGHT THREAD  
  3K-0360 [1] SEAL-O-RING  
20. 8H-2810 [1] CASE AS-FILTER  
21. 6V-8724 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
22. 6V-8397 [2] SEAL-O-RING  
23. 8H-2807 [1] NUT  
24. 1L-3769 [1] RING-RETAINING  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#HEBP17430077
 

7C-4028: SOLENOID GP-SHUTOFF

7C4028 SOLENOID GP-SHUT-OFF-24 VOLT DC, BOSS MOUNTED
Engine S/N 4TF1-4727
9X5524-Page 43.00.01
c499575 HEBP1743
7C4028 SOLENOID GP-SHUTOFF Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-5524 Y [1] SOLENOID AS  
2. 4K-1388 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#HEBP17430078
 

7C-4028: SOLENOID GP-SHUTOFF

7C4028 SOLENOID GP-SHUT-OFF-24 VOLT DC, BOSS MOUNTED
Engine S/N 4TF4728-Up
c531440 HEBP1743
7C4028 SOLENOID GP-SHUTOFF Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3663 C [1] SOLENOID AS-MAGNETIC  
  6V-8377 [2] NUT (8-32 THD)  
  9B-7233 [2] LOCKWASHER  
  6V-8378 [1] NUT (10-32 THD)  
  4B-4274 [1] WASHER  
2. 4K-1388 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP17430079
 

9X-5524: SOLENOID AS

9X5524 SOLENOID AS-LATCHING
24 Volt
Engine S/N 4TF1-4727
Part Of 7C4028 Solenoid-Shut-Off
c499579 HEBP1743
9X5524 SOLENOID AS Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-8312 M [2] NUT  
2. 9B-7233 [2] LOCKWASHER  
3. 5C-2874 M [1] NUT  
4. 8F-1434 [1] LOCKWASHER  
  M   METRIC PART
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Letter-NACD
The Hose From The Turbocharger To The Inlet Manifold May Need To Be Replaced On Certain 918F, 924F, 928F, 938F, 950F And 953B Loaders, IT18F, IT24F And IT28F Tool Carriers, 206B, 212B, 213B, 214B, 320, 320S And 322 Excavators, 613C Scrapers, CS531, CP533, CS533, CP563, CS563, CB634 And CS583 Compactors And AP1000 And AP1050 Asphalt Pavers
The Hose From The Turbocharger To The Inlet Manifold May Need To Be Replaced On Certain 918F, 924F, 928F, 938F, 950F And 953B Loaders, IT18F, IT24F And IT28F Tool Carriers, 206B, 212B, 213B, 214B, 320, 320S And 322 Excavators, 613C Scrapers, CS531, CP533, CS533, CP563, CS563, CB634 And CS583 Compactors And AP1000 And AP1050 Asphalt Pavers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Hose From The Turbocharger To The Inlet Manifold May Need To Be Replaced On Certain 918F, 924F, 928F, 938F, 950F And 953B Loaders, IT18F, IT24F And IT28F Tool Carriers, 206B, 212B, 213B, 214B, 320, 320S And 322 Excavators, 613C Scrapers, CS531, CP533, CS533, CP563, CS563, CB634 And CS583 Compactors And AP1000 And AP1050 Asphalt Pavers
The Hose From The Turbocharger To The Inlet Manifold May Need To Be Replaced On Certain 918F, 924F, 928F, 938F, 950F And 953B Loaders, IT18F, IT24F And IT28F Tool Carriers, 206B, 212B, 213B, 214B, 320, 320S And 322 Excavators, 613C Scrapers, CS531, CP533, CS533, CP563, CS563, CB634 And CS583 Compactors And AP1000 And AP1050 Asphalt Pavers
Testing and Adjusting
Turbocharger - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Turbocharger - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Turbocharger - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Dealer Installed Air Inlet Heater Starting Aid Available{1058}
1993/09/27
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft {1053,1052}
1994/02/28
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 213B :

TURBOCHARGER GP
4P-4681 TURBOCHARGER GP
TURBOCHARGER GP
7C-2183 TURBOCHARGER GP
TURBOCHARGER GP
4W-2107 TURBOCHARGER GP
TURBOCHARGER GP
4W-2107 TURBOCHARGER GP
LINES GP-AIR
1W-6029 LINES GP-AIR
LINES GP-TURBOCHARGER OIL
1W-6030 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
1W-6030 LINES GP-TURBOCHARGER OIL
MANIFOLD GP-INLET
4W-3480 MANIFOLD GP-INLET
4P-4686 CARTRIDGE GP-TURBOCHARGER
FILTER GP-FUEL
1N-3476 FILTER GP-FUEL
PUMP GP-FUEL INJECTION
7C-5799 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIME & PRIM FLTR
4P-0723 PUMP GP-FUEL PRIME & PRIM FLTR
SOLENOID GP-SHUTOFF
7C-4028 SOLENOID GP-SHUTOFF
SOLENOID GP-SHUTOFF
7C-4028 SOLENOID GP-SHUTOFF

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.