AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8U0135 COVER GP PART OF 8U0506 HOOD GP-GUARD 213B EXCAVATOR


FUEL SYSTEM
PUMP GP-FUEL INJECTION
FRAME AND BODY
ENCLOSURE GP
PANEL GP
FRAME GP
HYDRAULIC SYSTEM
DRIVE GP
FRAME AND BODY
SWING GP
HYDRAULIC SYSTEM
MOTOR GP

EXCAVATOR 213B EXCAVATOR 1EJ
 213B EXCAVATOR TRACK TYPE 1EJ00001-UP (MACHINE) POWERED BY 3116 ENGINE HEBP1743 213B 1EJ   (1988)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP
8U-4226 PUMP GP
COVER GP
8U-5129 COVER GP
COVER GP
8U-0135 COVER GP
 

#HEBP17430190
 

8U-0135: COVER GP

8U0135 COVER GP
PART OF 8U0506 HOOD GP-GUARD
c928409 HEBP1743
8U0135 COVER GP Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-0790 [1] COVER AS.  
2. 8U-0791 [1] COVER  
3. 8U-0796 [9] WASHER-RETAINING  
4. 5W-8133 D [2] SEAL-BULK .85M (33.460IN)  
5. 5W-8133 D [1] SEAL-BULK .35M (13.780IN)  
6. 8U-0169 [1] STOP  
7. 8U-0173 [1] SPRING  
8. 8U-0795 [1] BAR-LOCKING  
9. 8U-0170 [1] BODY-LATCH  
10. 8U-0172 [1] ROD  
11. 8U-0174 [2] WASHER  
12. 8U-0175 [1] LOCK AS  
13. 8U-0783 [1] KEY  
  D   ORDER BY THE METER
 

#HEBP17430191
 

8U-5126: DOOR GP

8U5126 DOOR GP
PART OF 8U6638 HOOD GP-GUARD
c928410 HEBP1743
8U5126 DOOR GP Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-0786 [1] DOOR AS.  
2. 8U-5197 C [1] PLATE  
3. 5W-4667 [12] WASHER-RETAINING  
4. 5W-4315 [1] ROD GP  
5. [1] ROD  
6. 8T-4133 [1] NUT  
7. 5W-2744 [1] ROD-END  
8. 6V-5839 [1] WASHER  
9. 8T-4133 [1] NUT  
10. 5W-1943 [1] CLAMP-HOSE  
11. 8T-0306 [1] SCREW (M4X10)  
12. 5W-5038 [1] WASHER  
13. 5C-8312 [1] NUT  
14. 8U-0785 D [1] SEAL-BULK 1.775M (69.880IN)  
15. 8U-0785 D [1] SEAL-BULK .424M (16.690IN)  
16. 5W-2252 [2] BLOCK  
17. 8T-0264 [4] BOLT (M5X25)  
18. 8T-0328 [4] WASHER  
19. 5C-2874 C [4] NUT  
20. 8U-0169 [1] STOP  
21. 8U-0173 [1] SPRING  
22. 8U-0171 [1] LATCH  
23. 8U-0170 [1] BODY-LATCH  
24. 8U-0172 [1] ROD  
25. 8U-0174 [2] WASHER  
26. 8U-0175 [1] LOCK AS  
27. 8U-0783 [1] KEY  
  C   INDICATES CHANGE
  D   ORDER BY THE METER
 

#HEBP17430192
 

8U-0139: PANEL GP

8U0139 PANEL GP
PART OF 8U0506 HOOD GP-GUARD
c928411 HEBP1743
8U0139 PANEL GP Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-1080 [1] PANEL AS  
2. 8U-1044 [1] COVER GP  
3. 8U-1045 [1] COVER AS  
4. 8U-1046 [1] INSULATION  
5. 5W-4667 [4] WASHER-RETAINING  
6. 5W-1133 [4] FASTENER  
7. 5W-1119 [4] WASHER  
8. 8U-1083 [1] INSULATION  
9. 5W-4667 [17] WASHER-RETAINING  
10. 8U-1085 [1] INSULATION  
11. 8U-1086 [1] INSULATION  
12. 8U-1084 [1] INSULATION  
13. 8U-1090 [1] SEAL  
14. 8U-1081 [1] INSULATION  
15. 8U-1082 [1] INSULATION  
16. 8U-1087 [1] INSULATION  
17. 8U-1089 [2] INSULATION  
18. 8U-1088 [1] INSULATION  
19. 8U-1047 [1] COVER GP  
20. 8U-1048 [1] PLATE  
21. 8U-1049 [1] INSULATION  
22. 5W-4667 [1] WASHER-RETAINING  
23. 5W-1296 [8] SCREW  
 

#HEBP17430193
 

5W-9923: FRAME AR-UPPER

5W9923 FRAME AR-UPPER-PART 1 OF 3
VEHICLE S/N 1EJ1-117
PART OF 8U0936 FRAME AR-UPPER(W/HEATER)
PART OF 8U0939 FRAME AR-UPPER(W/O HEATER)
5W9910-PAGE 116, 8U1806-PAGE 117, 8U1804-PAGE 70
c928412 HEBP1743
5W9923 FRAME AR-UPPER Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-9924 [1] FRAME GP-UPPER  
2. 8U-2154 C [1] FRAME AS  
3. 5W-9906 [2] SPACER  
4. 5W-9901 [1] COVER AS  
5. 8U-3022 C [1] COVER AS  
6. 8U-3023 C [1] PLATE  
7. 5W-6687 [2] PLATE  
8. 9M-1974 [8] WASHER  
9. 6V-5217 [8] BOLT - M8X20  
10. 3B-4508 [2] LOCKWASHER  
11. 6V-8197 [2] BOLT  
12. 5W-9910 Y [1] LID AS  
13. 6V-8177 [8] BOLT  
14. 5W-9760 [8] WASHER  
15. 5W-4254 [1] PIN GP-SWINGLOCK  
16. 5W-4313 [1] PIN  
17. 5W-4288 [1] PLATE  
18. 3B-4507 [2] LOCKWASHER  
19. 6V-3938 [2] BOLT  
20. 5W-4977 [1] KNOB  
21. 8U-1806 Y [1] PANEL GP  
22. 8U-1804 Y [1] TANK GP-FUEL (287L)  
23. 5W-0173 [4] SPACER  
24. 8T-0357 [4] BOLT  
25. 5W-0218 B [4] PLATE 0.50MM(.019IN) THK  
25. 5W-0217 B [4] PLATE 1.0MM(.039IN) THK  
26. 5W-2585 [1] COCK-DRAIN  
27. 5W-7040 CE [1] TAPE-BULK 15CM(5.908IN)  
28. 5W-9930 [1] GAGE GP-FUEL  
  8U-2912 [1] GASKET  
29. 6V-4298 [5] BOLT  
30. 3B-4504 [5] LOCKWASHER  
31. 5W-9913 [1] BRACKET  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
  E   ORDER BY THE CENTIMETER
 

#HEBP17430194
 

5W-9923: FRAME AR-UPPER

5W9923 FRAME AR-UPPER -PART 1A OF 3
VEHICLE S/N 1EJ118-UP
PART OF 8U0929 FRAME AR-UPPER (W/HEATER)
PART OF 8U0934 FRAME AR-UPPER (W/O HEATER)
5W9910-PAGE 164, 8U1806-PAGE 165, 8U1804-PAGE 71
c928413 HEBP1743
5W9923 FRAME AR-UPPER Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-9924 [1] FRAME GP-UPPER  
2. 8U-2154 [1] FRAME AS  
3. 5W-9906 [2] SPACER  
4. 8U-4164 [1] COVER AS  
5. 8U-4165 [2] PLATE  
6. 9M-1974 [8] WASHER  
7. 6V-5217 [8] BOLT - M8X20  
8. 3B-4508 [2] LOCKWASHER  
9. 6V-8197 [2] BOLT  
10. 5W-9910 Y [1] BOX GP-BATTERY  
11. 6V-8177 [8] BOLT  
12. 5W-9760 [8] WASHER  
13. 5W-4254 [1] PIN GP-SWINGLOCK  
14. 5W-4313 [1] PIN  
15. 5W-4288 [1] PLATE  
16. 3B-4507 [2] LOCKWASHER  
17. 6V-3938 [2] BOLT  
18. 5W-4977 [1] KNOB  
19. 8U-1806 Y [1] PANEL GP  
20. 8U-1804 Y [1] TANK GP-FUEL (287L)  
21. 5W-0173 [4] SPACER  
22. 8T-0357 [4] BOLT  
23. 5W-0218 B [4] PLATE 0.50MM (.019IN) THK  
23. 5W-0217 B [4] PLATE 1,0MM (.039IN) THK  
24. 5W-2585 [1] COCK-DRAIN  
25. 5W-7040 E [1] TAPE-BULK 15CM (5.908IN)  
26. 5W-9930 [1] GAGE GP-FUEL  
  8U-2912 [1] GASKET  
27. 6V-4298 [5] BOLT  
28. 3B-4504 [5] LOCKWASHER  
29. 5W-9913 [1] BRACKET  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  E   ORDER BY THE CENTIMETER
 

#HEBP17430195
 

5W-9923: FRAME AR-UPPER

5W9923 FRAME AR-UPPER -PART 2 OF 3
PART OF 8U0936 FRAME AR-UPPER (W/HEATER)
PART OF 8U0939 FRAME AR-UPPER (W/O HEATER)
8U2599-PAGE 68
c928414 HEBP1743
5W9923 FRAME AR-UPPER Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-3630 [1] CLAMP  
2. 8U-1937 [1] HOSE-AIR FILTER  
3. 5W-1954 [2] CLAMP-HOSE  
4. 5W-1955 [2] CLAMP AS.  
5. 6V-4248 [4] BOLT  
6. 6V-5839 [8] WASHER  
7. 3B-4507 [4] LOCKWASHER  
8. 8T-4133 [4] NUT  
9. 8U-2599 Y [1] FILTER GP-AIR  
10. 5W-9916 [1] ELBOW  
11. 5W-9934 [1] SENDER-AIR FILTER  
12. 5W-9917 [1] CLAMP-HOSE  
13. 8U-2612 [1] PLATE  
14. 6V-8212 [4] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#HEBP17430196
 

5W-9923: FRAME AR-UPPER

5W9923 FRAME AR-UPPER-PART 3 OF 3
PART OF 8U0936 FRAME AR-UPPER(W/HEATER)
PART OF 8U0939 FRAME AR-UPPER(W/O HEATER)
5W9928-PAGE 111
c928415 HEBP1743
5W9923 FRAME AR-UPPER Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-9928 Y [1] DRIVE GP-SWING  
2. 8T-6594 [16] BOLT (M16X35)  
3. 5W-9915 [1] GEAR GP-BEARING &  
4. 6V-9667 C [72] BOLT (M20X100)  
5. 5W-9912 [36] SPACER  
6. 5W-4753 [6] FITTING GP  
    (EACH INCLUDES)
  5W-8021 [1] SEAL-O-RING  
7. 5W-1538 [2] FITTING  
8. 5W-1550 [2] FITTING  
9. 5W-9914 [2] TUBE GP  
    (EACH INCLUDES)
10. 5W-1636 [2] NUT  
11. 5W-1648 [2] RING-RETAINING  
12. 5W-5134 [2] GROMMET  
13. 5W-1893 [2] HOSE AS  
14. 5W-2998 [2] FITTING-GREASE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#HEBP17430197
 

5W-9928: DRIVE GP-SWING

5W9928 DRIVE GP-SWING
PART OF 5W9793 FRAME AR-UPPER
8U2512-PAGE 112, 8U2556-PAGE 114
c928416 HEBP1743
5W9928 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-2512 Y [1] DRIVE GP  
2. 8U-2556 Y [1] MOTOR GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#HEBP17430198
 

8U-2512: DRIVE GP

8U2512 DRIVE GP
PART OF 5W9928 DRIVE GP-SWING
c928418 HEBP1743
8U2512 DRIVE GP Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-2513 [1] HOUSING GP  
2. 8U-2514 [1] SHAFT  
3. 8U-2515 [1] WASHER  
4. 8U-2516 [1] RING  
5. 8U-2517 [1] BEARING  
6. 8U-2518 [1] HOUSING  
7. 8U-2519 [1] RING  
8. 5W-7412 [1] MAGNET  
9. 8U-2520 [1] BEARING  
10. 8U-2521 [1] SPACER  
11. 8U-2522 [1] SEAL-O-RING  
12. 8U-2523 [1] COLLAR  
13. 8T-4957 [12] BOLT (M10X30)  
14. 8U-2534 [2] SEAL-O-RING  
15. 8U-2524 [1] SEAL  
16. 8U-2525 [1] GEAR-PLANETARY  
17. 8U-2526 [4] GEAR GP  
    (EACH INCLUDES)
18. [1] BEARING  
19. [1] GEAR  
20. 8U-2056 [4] RING-RETAINING  
21. 8U-2527 [1] WASHER  
22. 8U-2528 [1] RING-RETAINING  
23. 8U-2529 [1] SHAFT  
24. 8U-2530 [1] GEAR  
25. 8U-2531 [1] RING-RETAINING  
26. 8U-2532 [3] GEAR GP  
    (EACH INCLUDES)
27. 8U-2533 [2] RING  
28. [1] BEARING  
29. [1] GEAR  
30. 5W-5362 [3] RING-RETAINING  
31. 8U-2535 [1] HOUSING  
32. 8U-2536 [1] BRAKE GP-SWING  
33. 8U-2537 [1] RING-RETAINING  
34. 8U-2538 [2] SEAL-O-RING  
35. 8U-2539 [1] BRAKE GP  
36. 8U-2540 [1] WASHER  
37. 8U-2541 [10] SPRING  
38. 8U-2542 [1] PISTON  
39. 8U-2543 [1] SEAL-O-RING  
40. 8U-2544 [1] HOUSING  
41. 8U-2545 [5] DISC  
42. 8U-2546 [6] DISC  
43. 8U-2547 [6] PIN  
44. 8U-2548 [1] HOUSING  
45. 8U-2549 [1] GEAR  
46. 8U-2552 [1] SEAL-O-RING  
47. 8U-2551 [1] FITTING  
48. 8U-2191 [1] SEAL-O-RING  
49. 8U-2088 [2] ADAPTER  
50. 8U-2089 [2] SEAL-O-RING  
51. 8U-2550 [1] NOZZLE  
52. 8U-2553 [2] WASHER  
53. 8U-2554 [2] STUD  
54. 6V-8486 [2] NUT  
    FOLLOWING REPAIR KIT AVAILABLE:
  8U-2555 [1] REPAIR KIT  
    INCLUDES POS.4,7,11,14,15,34,39,46
 

#HEBP17430199
 

8U-2556: MOTOR GP-SWING

8U2556 MOTOR GP-SWING
PART OF 5W9928 DRIVE GP-SWING
c928420 HEBP1743
8U2556 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 213B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-2557 [1] MOTOR GP  
2. 8U-2558 [1] RING-RETAINING 2.2MM (.086IN) THK  
2. 8U-2559 [1] RING-RETAINING 2.5MM (.098IN) THK  
2. 8U-2560 [1] RING-RETAINING 2.8MM (.110IN) THK  
12. 8U-2561 [1] RING-RETAINING 3.0MM (.118IN) THK  
3. 8U-2562 [1] COVER  
4. 8U-2563 [1] SEAL-O-RING  
5. 8U-2564 [1] SEAL  
6. 8U-2565 [1] HOUSING  
7. 5W-7444 [1] RACE  
8. 8U-2566 [1] BEARING  
9. 8U-2567 [1] SHAFT  
10. 8U-2568 [1] DOWEL  
11. 8U-2569 [1] COVER  
12. 8U-2570 [9] PISTON  
13. 5W-7450 [1] WASHER  
14. [1] WASHER  
15. [1] BALL  
16. 8U-2571 [3] BEARING-NEEDLE  
17. 8U-2572 [1] CYLINDER  
18. 5W-7457 [2] WASHER  
19. 8U-2573 [1] SPRING  
20. 5W-5365 [1] RING-RETAINING  
21. 8U-2574 [1] WASHER  
22. 8U-2575 [1] BEARING  
23. 8U-2576 [1] PLATE  
24. 8U-2191 [1] SEAL-O-RING  
25. 8U-2190 [1] ADAPTER  
26. 5W-7487 [1] DOWEL  
27. 8U-2577 [1] HOUSING  
28. 8T-0341 [4] BOLT  
29. 8U-2578 [1] VALVE GP-BRAKE  
30. 8U-2579 [1] HOUSING  
31. 5W-8510 [3] PLUG  
32. 5W-2926 [2] PLUG GP  
    (EACH INCLUDES)
  5W-3068 [1] SEAL-O-RING  
33. 8U-2189 [2] SEAL-O-RING  
34. 8U-2580 [1] SEAL-O-RING  
35. 8U-2581 [2] VALVE GP  
    (EACH INCLUDES)
36. 8U-2685 [1] SEAL-O-RING  
37. 8U-2288 [1] CARTRIDGE  
38. 5W-1752 [1] SEAL-O-RING  
39. 5W-8512 [1] RING  
40. 5W-2528 [1] SPRING-CAP  
41. 8U-4233 C [1] SPRING  
42. 5W-1753 [1] SEAL-O-RING  
43. 8U-2583 [1] ADAPTER  
44. 5W-5625 [4] WASHER 0.1MM (.003IN) THK  
44. 8U-2488 [4] WASHER 0.5MM (.019IN) THK  
45. 8U-2584 [1] SPRING  
46. 8U-2585 [4] WASHER 0.1MM (.003IN) THK  
46. 8U-2586 [4] WASHER 0.5MM (.019IN) THK  
47. 8U-2587 [1] PISTON  
48. 8U-2588 [1] SEAL-O-RING  
49. 8U-2589 [1] PLUG  
50. 8U-2590 [1] BOLT  
51. 5W-4004 [1] SET SCREW  
    FOLLOWING REPAIR KIT AVAILABLE:
  8U-2591 [1] REPAIR KIT  
    INCLUDES POS.4,5,24,33,34,36,38, 42,48
  C   INDICATES CHANGE
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Fuel Timing Dimension - Adjust
3114, 3116, and 3126 Engines
Unit Injector - Adjust
3114, 3116, and 3126 Engines
Unit Injector Synchronization - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
New Seal Used In Governor Fastener Group{1264}
1990/01/29
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/24
Fuel Injector Group Rack Movement{1290}
1992/05/18
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Unit Injector Tip Seal Deterioration {1290}
1993/01/25
Measuring "Dynamic Rack" Of Unit Injectors{0780}
1993/06/21
New Fuel Injector Control Linkage{1298}
1993/08/30
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/07/31
New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06
Mechanical Unit Injector Identification Code{1290}
1995/12/18
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/05
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01
Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
2000/04/17
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/19
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/23

Caterpillar Parts SIS Catalog 213B :

DOOR GP-RADIATOR CAP (LOCKABLE)
8U-2721 DOOR GP-RADIATOR CAP (LOCKABLE)
COVER GP
8U-5129 COVER GP
DOOR GP
8U-5125 DOOR GP
8U-0506 HOOD GP-GUARD
HOOD GP-GUARD
8U-0506 HOOD GP-GUARD
CHAIN GP-TRACK
5W-9836 CHAIN GP-TRACK
TRACK GP (1000MM)(39.370IN) LC
5W-9840 TRACK GP (1000MM)(39.370IN) LC
TRACK GP (900MM)(35.433IN) LC
5W-9839 TRACK GP (900MM)(35.433IN) LC
DOOR GP
8U-5126 DOOR GP
PANEL GP
8U-0139 PANEL GP
FRAME AR-UPPER
5W-9923 FRAME AR-UPPER
5W-9923 FRAME AR-UPPER
5W-9923 FRAME AR-UPPER
5W-9923 FRAME AR-UPPER
DRIVE GP-SWING
5W-9928 DRIVE GP-SWING
8U-2512 DRIVE GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.