HEEL GP 3622813 - Caterpillar

Removal Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g01182583
Remove bolts (1) and guard (2) .
Illustration 2 g01182584
Close fuel shutoff (3) .
Illustration 3 g01182585
Remove bolts (4) and open door (5) .
Illustration 4 g01182586
Disconnect hose assemblies (8) and (9). Remove bolts (6) and fuel cooler (7) .Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 5 g01182586
Position fuel cooler (7) and install bolts (6) .
Connect hose assemblies (8) and (9) .
Illustration 6 g01182585
Close door (5) and install bolts (4) .
Illustration 7 g01182584
Open fuel shutoff (3) .
Illustration 8 g01182583
Install guard (2) and bolts (1) .