HINGE AS 1981774 - Caterpillar

Differential
Illustration 3 g02813118
Table 3
Item Qty Part Specification Description
19 As required, use the following shims to attain the necessary preload for the bearings and for the backlash for the pinion:
1 209-4303 Shim Thickness is 2.50 mm (0.098 inch).
1 209-4304 Shim Thickness is 2.60 mm (0.102 inch).
1 209-4305 Shim Thickness is 2.70 mm (0.106 inch).
1 209-4306 Shim Thickness is 2.80 mm (0.110 inch).
1 209-4307 Shim Thickness is 2.90 mm (0.114 inch).
1 209-4308 Shim Thickness is 3.00 mm (0.118 inch).
1 293-8765 Shim Thickness is 3.10 mm (0.122 inch).
1 209-4309 Shim Thickness is 3.20 mm (0.126 inch).
1 209-4310 Shim Thickness is 3.30 mm (0.130 inch).
1 209-4311 Shim Thickness is 3.40 mm (0.134 inch).
20 1 217-2868 Bevel Gear and Pinion Gp Backlash is 0.18 mm to 0.32 mm (0.007 inch to 0.013 inch).
21 12 266-4360 Bolt Before assembly, apply Loctite 638 to the threads.
Torque to 101 N m to 105 N m (74 lb ft to 77 lb ft).
22 4 208-0322 Bolt Torque to 187 N m to 231 N m (138 lb ft to 170 lb ft).
23 2 199-0695 Bolt Torque to 6.50 N m to 13.65 N m (58 lb in to 121 lb in).
24 1 216-4457 Seal Installation depth is 13.5 mm to 14.0 mm (0.53 inch to 0.55 inch). Final Drive
Illustration 4 g02813618
Table 4
Item Qty Part Specification Description
25 1 229-5092 Seal Installation depth is 4.0 mm to 4.5 mm (0.16 inch to 0.18 inch).
26 1 226-4366 Nut Use any one of the following methods to tighten the nut:
Torque to 1000 N m (738 lb ft).
Apply black 4C-5592 Anti-Seize Compound to the threads and to the mating surface, and then tighten to 800 N m (590 lb ft).