HINGE AS 1V8844 - Caterpillar

Illustration 2 g03582683
(2) Air conditioner (3) Valve (4) Hose (5) Rubber bung
Remove and discard rubber bung (5) from air conditioner (2) .
Remove and discard two hoses (4) and valve (3) .Installation Procedure
Illustration 3 g03657398
Typical view of operator station (B) 27 mm (1.1 inch) (C) 38 mm (1.5 inch) (D) 13 mm (0.5 inch) (Diameter)
Drill hole in operator station. Refer to Illustration 3.
Illustration 4 g03656311
(6) 308-7605 Tube As
Install 308-7605 Tube As (6) to hole drilled in Step 1. Refer to Illustration 4.
Illustration 5 g03656309
(6) 308-7605 Tube As (E) 14 1.5 mm (0.6 0.06 inch)
Weld 308-7605 Tube As (6) in position. Refer to Illustration 5 and Table 2.
Table 2
Item     Dimension    
W1    
4 mm (0.16 inch) Fillet weld    
Illustration 6 g03583338
(1) 9X-2133 Hose (7) 7T-9793 Check Valve
Illustration 7 g03584316
(1) 9X-2133 Hose (7) 7T-9793 Check Valve (F) 25 mm (1 inch)
Install a 7T-9793 Check Valve (7) to each 9X-2133 Hose (1). Refer to Illustration 6 and 7.
Illustration 8 g03656317
(1) 9X-2133 Hose (2) Air conditioner
Install one 9X-2133 Hose (1). Refer to Illustration 8.Note: 9X-2133 Hose (1) replaces two hoses (4) removed in Step 7 of ""Removal Procedure"".Note: Ensure that the end of 9X-2133 Hose (1) containing 7T-9793 Check Valve (7) is not installed to air conditioner (2) .
Illustration 9 g03656318
(1) 9X-2133 Hose (2) Air conditioner (6) 308-7605 Tube As
Install the remaining 9X-2133 Hose (1) between air conditioner (2) and 308-7605 Tube As (6). Refer to Illustration 9.Note: Ensure that the end of 9X-2133 Hose (1) containing 7T-9793 Check Valve (7) is not installed to air conditioner (2) .
Illustration 10 g03584296
(1) 9X-2133 Hose (8) 3S-2093 Cable Strap
Secure both 9X-2133 Hoses (1) using two 3S-2093 Cable Straps (8) each.