HINGE A.-LH 5K5390 - Caterpillar

User Interface
The new update also brings some improvements to the use interface:Ease of use application change by swipe - Currently, when any ease of use application is selected, the selection will be based on the last ease of use selected. The swiping function is added to allow the operator to know what are the ease of use applications being enabled or disabled.Sounds when Bucket Store Recall is pushed - This feature is for the payload. Currently, when the operator required Bucket Store Recall, there is no acknowledgement that the command is enabled. The update provides a sound from the display to acknowledge that the command was activated. This sound will make the activation of the feature clearer to the operator.Electronic Operation and Maintenance Manual (eOMM) contents flash - EOMM content data was pre-installed on the monitor software. From this new monitor software, the eOMM content data can be flashed using a USB. The content file can be downloaded from SIS web by searching for the part number only. Refer to Table 2 for the part numbers.
Table 2
eOMM Content Flash
Part Number Model Media Number
568-3219 320, 320GC, 323 HRC(1) M0068104
568-3221 320, 320GC, 323 LRC(2) M0083583
568-3222 336, 336GC HRC(3) M0082496
568-3223 336, 336GC LRC(4) M0087328
(1) Serial prefixes HEX, RAZ, KTN
(2) Serial prefixes ZBN, DWF, YBL, DKJ, BR4, BR6, BR9, YBP, ZBT
(3) Serial prefixes YBN, JHD, DKS, EBJ
(4) Serial prefixes SP9, GDY, JFW, FELProcedure to Flash eOMM Content
Use the following procedure to flash the eOMM onto the monitoring system:
Illustration 22 g06341597
From the main screen, press the application menu button in the bottom left corner.
Illustration 23 g06341598
Select "Setting", then press "OK".
Illustration 24 g06341599
Press "Service".
Illustration 25 g06341600
Enter service password and press "Enter".
Illustration 26 g06341603
Select "Manage eOMM Data", then press "OK".
Illustration 27 g06341602
Select "Flash".
Illustration 28 g06341604
Insert USB memory stick and press "OK". Wait until detecting eOMM flash file on USB memory stick.
Select the appropriate flash file from the list of files from the USB, then press "OK".
Illustration 29 g06341605
Press all blank boxes to select all eOMM languages, then press "OK".
Illustration 30 g06341606
Press "Start" to start flashing the eOMM data.The process will take approximately 30 seconds to flash 8 languages.