HINGE AS 5V2573 - Caterpillar

Illustration 1 g01637107
Seat Recline Lever (1) - In order to move the back of the seat to the desired position, pull up seat recline lever (1). Release the lever in order to lock the back of the seat into position.
Lumbar Support Knob (2) - Turn knob (2) counterclockwise in order to increase the lumbar support. Turn the knob clockwise in order to decrease the lumbar support.
Illustration 2 g01866288
Cushion Angle Adjustment (3) - Push and hold lever (3) down, move the seat cushion to the desired angle. Release the lever in order to lock the seat cushion into position. The seat cushion can be adjusted to one of four positions.
Fore and Aft Lever (4) - Pull up fore and aft lever (4). Hold the lever upward and slide the seat forward or backward to the desired position. Release the lever in order to lock the seat into position.
Suspension Damping Knob (5) - Turn suspension damping knob (5) in order to change the stiffness of the suspension. Turn suspension damping knob (5) until the weight setting on the dial is the same as the operator weight. Do not turn the knob past the maximum weight setting or past the minimum weight setting. Adjust the seat in order to allow full travel of the pedals. Make the seat adjustments when the operator is sitting against the back of the seat. In order to reduce fatigue, periodically readjust the seat and the backrest for additional comfort.