6P6113 HINGE (L.H.) Caterpillar parts
D7G, D8K, D9H
Rating:
Alternative (cross code) number:
CA6P6113
6P-6113
6P6113
CA6P6113
6P-6113
6P6113
Weight: 7 pounds 3 kg.
Information:
FIXING HOLES
BOTH LEAVES
LENGTH
1400.05
mm
LONG LEAF WIDTH
38.1
mm
PIN DIAMETER
6.35
mm
SHORT LEAF WIDTH
38.1
mm
THICKNESS
3.05
mm
TYPE
000000000001
TRACK-TYPE TRACTOR,
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01150731
Disconnect harness assembly (1).
Remove bolt (3) and crankshaft position sensor (2).
Remove the O-ring seal from crankshaft position sensor (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01150731
Install a new O-ring seal on crankshaft position sensor (2). Lubricate the O-ring seal with clean engine oil.
Install crankshaft position sensor (2) in the front housing. Install bolt (3). Tighten bolt (3) to a torque of 28 7 N m (21 5 lb ft).
Connect harness assembly (1).
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01150731
Disconnect harness assembly (1).
Remove bolt (3) and crankshaft position sensor (2).
Remove the O-ring seal from crankshaft position sensor (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01150731
Install a new O-ring seal on crankshaft position sensor (2). Lubricate the O-ring seal with clean engine oil.
Install crankshaft position sensor (2) in the front housing. Install bolt (3). Tighten bolt (3) to a torque of 28 7 N m (21 5 lb ft).
Connect harness assembly (1).
Cat SIS web machinery list:
Parts hinge Caterpillar catalog:
3Y7053
HINGE
305.5, 306, 306E, D5B, D6D, D7G
305.5, 306, 306E, D5B, D6D, D7G
8K3351
HINGE
213B, 235, 572G, 627B, 657E, D6T LGP, D6T XL, D7G
213B, 235, 572G, 627B, 657E, D6T LGP, D6T XL, D7G
2S1149
HINGE
826B, 977H, 977K, 977L, 983B, D4D, D5, D5B, D6C, D6D, D7F, D7G, D8K
826B, 977H, 977K, 977L, 983B, D4D, D5, D5B, D6C, D6D, D7F, D7G, D8K
6P5824
HINGE
D7G, D8K
D7G, D8K
6P5488
HINGE
D7G, D8K, D9H
D7G, D8K, D9H
6P5489
HINGE
D7G, D8K
D7G, D8K
6P5811
HINGE
D7G, D8K
D7G, D8K
7G2557
HINGE ASSEM.
D7G, D8K
D7G, D8K
1F7402
HINGE
D7G
D7G
8P0114
HINGE
D9H
D9H
8P0135
HINGE
D9H
D9H
6P3808
HINGE
D7F
D7F
6P3629
HINGE
D8H
D8H
6P8417
HINGE
D7G
D7G
6P5489
HINGE
D7G, D8K
D7G, D8K
6P5488
HINGE
D7G, D8K, D9H
D7G, D8K, D9H
6P5824
HINGE
D7G, D8K
D7G, D8K
6P6061
HINGE (R.H.)
D7G, D8K, D9H
D7G, D8K, D9H