1024176 HOLD-DOWN-BATTERY Caterpillar parts
416D, 420D, 422E, 424D, 428D, 428E, 432D, 432E, 438D, 442D, 442E, 924G, 924GZ, 924H, 924HZ, 928F, 928H, 928HZ, 930G, IT28F, IT28G
Rating:
Alternative (cross code) number:
CA1024176
102-4176
1024176
CA1024176
102-4176
1024176
Weight: 0.90 pounds 0 kg.
BACKHOE LOADER, WHEEL LOADER,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
10pcs 6AWG Wire Connectors, Brass Quick Connecting Terminals 80 Amp Connectors Yellow Wire Connector Nut Kit with Screws and Shrink Tubes for Home and Car
XIHIRCD High Load Capacity: These 80 amp 6 gauge wire connectors are suitable for household appliances, automobiles, mechanical equipment, distribution panels and more, providing high current carrying capacity. || Stability and Reliability: The quick connection terminals are small and light, easy to use, ensuring the stability and reliability of the connection. Please note that the 6 gauge wire connector kit is only suitable for 6 gauge cable. || Product Contents: Your package includes a set of quick connection terminal, including 10 quick connection terminals, 20 fixing screws, 10 shrink tubes and a hex wrench. || Strong Material: Our circuit terminals are made of quality brass, it is not easily deformed or damaged, and you can use it with more confidence. || Quick and Easy to Use: The wire connector nut kit is equipped with a hex wrench, fixing screws and shrink tubes to simplify the wiring process.
XIHIRCD High Load Capacity: These 80 amp 6 gauge wire connectors are suitable for household appliances, automobiles, mechanical equipment, distribution panels and more, providing high current carrying capacity. || Stability and Reliability: The quick connection terminals are small and light, easy to use, ensuring the stability and reliability of the connection. Please note that the 6 gauge wire connector kit is only suitable for 6 gauge cable. || Product Contents: Your package includes a set of quick connection terminal, including 10 quick connection terminals, 20 fixing screws, 10 shrink tubes and a hex wrench. || Strong Material: Our circuit terminals are made of quality brass, it is not easily deformed or damaged, and you can use it with more confidence. || Quick and Easy to Use: The wire connector nut kit is equipped with a hex wrench, fixing screws and shrink tubes to simplify the wiring process.
Number on catalog scheme:
7
For full view, you need register
Compatible equipment models: 1024176:
Cat SIS web machinery list:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-0812 Cylinder Liner Puller 1
1U-6317 Bridge 1
1U-6319 Socket 1 Start By:
Remove the spacer plate. Refer to Disassembly and Assembly, "Spacer Plate - Remove and Install".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00474523
Turn the crankshaft until two of the pistons are at the bottom center. Remove two connecting rod cap bolts (2) from each rod. Remove connecting rod caps (4) .
Tap connecting rod (3) away from the crankshaft with a soft hammer. Remove bearing half (1) .
Illustration 2 g00474623
Use tool (A) to remove cylinder liners (5) .
Remove the pistons and connecting rods from the cylinder liners.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-0812 Cylinder Liner Puller 1
1U-6317 Bridge 1
1U-6319 Socket 1 Start By:
Remove the spacer plate. Refer to Disassembly and Assembly, "Spacer Plate - Remove and Install".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00474523
Turn the crankshaft until two of the pistons are at the bottom center. Remove two connecting rod cap bolts (2) from each rod. Remove connecting rod caps (4) .
Tap connecting rod (3) away from the crankshaft with a soft hammer. Remove bearing half (1) .
Illustration 2 g00474623
Use tool (A) to remove cylinder liners (5) .
Remove the pistons and connecting rods from the cylinder liners.