HOLDER-GEAR 1325451 - Caterpillar

Illustration 1 g06122810
Table 1
Specification for Bucket Cylinder Gp
Item Qty Part Specification Description
1 1 290-9180 Bushing Bore before assembly is 80.200 0.040 mm (3.1575 0.0016 inch).
Installation depth in 357-9772 Cap As is 9.85 0.30 mm (0.388 0.012 inch).
Installation depth in 357-9770 Cap As is 9.90 0.30 mm (0.390 0.012 inch).
2 1 7Y-4695 Locknut Before assembly, lubricate the face and all around the threads with 309-6932 Hydraulic Oil.
Torque to 11000 550 N m (8113 406 lb ft).
3 2 188-4217 Ring Lubricate the inside diameter and the outside diameter with clean grease.
4 1 Seal As Lubricate the inside diameter and the outside diameter with clean grease.
5 1 188-4218 Ring Lubricate the inside diameter and the outside diameter with clean grease.
A 1 357-9767 Cylinder As Bore is 150.05 0.05 mm (5.907 0.002 inch).
B 1 357-9776 Rod As Diameter is 104.930 0.038 mm (4.1311 0.0015 inch).
C 1 358-8524 Head Bore over two lands is 105.63 0.03 mm (4.159 0.001 inch).
6 1 228-5617 Bushing Bore before assembly is 100.216 0.040 mm (3.9455 0.0016 inch).
Installation depth is 10.0 0.5 mm (0.39 0.02 inch).
7 1 114-0760 Bushing Outside diameter is 110.148 0.033 mm (4.3365 0.0013 inch).
Thickness is 2.475 0.025 mm (0.0974 0.0010 inch).
8 1 Buffer Seal Lightly lubricate the sealing lip with the lubricant that is being sealed.
9 1 U-Cup Seal Lightly lubricate the sealing lip with the lubricant that is being sealed.
10 1 165-9290 Lip Type Seal Lightly lubricate the sealing lip with the lubricant that is being sealed.
11 - - Before assembly, apply green Loctite 648 to the wiper seal groove.
12 8 - Tighten bolt to 300 30 N m (221 22 lb ft) and additionally turn to an angle of 30 5 degrees.