HOOD 0831024 - Caterpillar

Illustration 1 g00808783
Illustration 2 g00808883
Remove bolt (2) and pin (3) from ballast (1). With a lifting device, carefully lower ballast (1) to rest on a wood block.
Attach lifting chains (4) and a hoist to the top of the cab assembly.
Illustration 3 g00808884
Remove the bolt and nut (5) and remove the bolts and nuts (6) from each side that holds the cab to the frame.
Illustration 4 g00808885
Disconnect cable (7) from the governor. Loosen jam nut (8). Remove the cable from bracket (9) .
Illustration 5 g00808886
Use a hoist in order to raise the cab. Raise the cab until the two holes are aligned. Install one bolt (10) and wood block (11) on each side of the cab.Note: In order to lower the cab, reverse the procedure for tilting the cab.