AVSPARE.COM
parts catalog

HOOD AS 3236845 - Caterpillar



3236845 HOOD AS Caterpillar parts HOOD
Rating:
56
Alternative (cross code) number:
CA3236845
323-6845
3236845
Caterpillar 3236845 HOOD AS

Buy HOOD AS 3236845 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 5 g00510352
Remove O-ring seals (12) and washer set (13).
Use a suitable strap to retain brake piston (14). Place a shop towel over brake piston (14). Apply approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y). Make sure that the shop air pressure is free of water. Brake piston (14) will move up the piston guide, and out of the piston guide.
Remove brake piston (14).
Illustration 6 g01725813
Remove O-ring seal (15) from brake piston (14). Remove backup ring (16) from brake piston (14).
Remove O-ring seal (17) from brake piston (14). Remove backup ring (18) from brake piston (14).
Illustration 7 g00510356
Remove piston guide (19), friction plates (20), and the steel plates from the body of the travel motor.
Illustration 8 g01725873
Remove O-ring seal (21) from piston guide (19). Remove backup ring (22) from piston guide (19).
Illustration 9 g06091503Note: Do not allow the components of barrel assembly (23) to come apart during the removal from the travel motor. All the components in the barrel assembly must be reinstalled in the original locations.
Carefully lay the travel motor on its side. Remove barrel assembly (23). Do not allow the components to fall apart.
Illustration 10 g00510502Note: Retainer (24) and pistons (25) are serviced as one part. Prior to the removal of retainer (24) and pistons (25) from barrel (26), put identification marks on pistons (25) for assembly purposes. Identification marks are used to identify the location in retainer (24) and barrel (26). The pistons must be reinstalled in the original bores in retainer (24) and barrel (26).
Remove retainer (24) and pistons (25) from barrel (26). Separate pistons (25) from retainer (24).
Illustration 11 g01726541
Remove guide (27), spacer (28), and springs (29) from barrel (26).
Illustration 12 g00510547
Remove cam plate (30) from the body of the travel motor.
Illustration 13 g00510550
Remove keys (31) and the two locating pins (not shown) from the body of the travel motor.
Illustration 14 g06091533
Remove O-ring seal (33) from the body of the travel motor.
Use a suitable soft faced hammer to remove shaft assembly (34) from the body of the travel motor. Remove shaft assembly (34) in the direction that is indicated by the arrow. Refer to Illustration 14.
Illustration 15 g01726759
Remove retaining ring (35). Remove bearing (36) from shaft assembly (34).
Illustration 16 g00510598
Remove inner race (37) from shaft assembly (34).
Illustration 17 g00510599
Remove lip seal (38) from the body of the travel motor.
Illustration 18 g00510605
Remove stoppers (39) and the pistons from the body of the travel motor.


Parts hood Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.