AVSPARE.COM
parts catalog

HOOD AR 4416342 - Caterpillar



4416342 HOOD AR Caterpillar parts HOOD
Rating:
76
Alternative (cross code) number:
CA4416342
441-6342
4416342
Caterpillar 4416342 HOOD AR

Buy HOOD AR 4416342 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Introduction
This instruction provides the necessary information required to properly orient the mounting flange, air intake port, and air exhaust port on 4W0695 (standard rotation - ccw) and 4W0697 (reverse rotation - cw) Air Start Motors. These two air start motors will be the only two air starters available for the 3600 Family of engines.
In-Line Engine with one starter, right side mounting.These air starters may be used for either left hand or right hand mounting on the 3606 and 3608 Engines.
Vee-Engine with two starters, left side mounting.The 3612 and 3616 Engines require two air start motors mounted on the left side of the engine.Reference: Service Manual, Parts Book.Drive Housing Orientation
The drive housing (mounting flange) may be oriented in any of sixteen radial positions in relation to the gear case.
(1) Drive Housing Mounting Flange. (2) Drive Housing Cap Screws.To orient the drive housing relative to the gear case, remove the eight drive housing cap screws (2) and rotate the drive housing (1) to the required position. Do Not separate the drive housing from the gear case.Install the drive housing cap screws (2) and tighten the screws to 38 N m (28 lb ft).Intake Port And Exhaust Port Orientation
The intake port and exhaust port can be oriented for proper location of hose installation, and may be oriented in any of four positions depending on left hand or right hand mounting requirements.
(3) Intake Port. (4) Exhaust Port. (5) Motor Housing Cap Screws.To orient the intake port (3) and/or exhaust port (4) of the air starter, remove the four motor housing cap screws (5). Rotate the motor housing and/or motor housing cover to the proper location. Do Not separate these members from each other or from the gear case.Install the motor housing cover cap screws (5) and alternately tighten them to 82 N m (60 lb ft).

Caterpillar SIS machinery equipment:

Caterpillar SIS
  • MH3022 Wheeled Excavator Material Handler FM200001-UP (MACHINE) POWERED BY C7.1 Engine » 441-6342 HOOD AR

Caterpillar parts catalog:

Caterpillar parts catalog
MH3022 Wheeled Excavator Material Handler FM200001-UP (MACHINE) POWERED BY C7.1 Engine


Parts hood Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.