HOOD ASSEM. 4Y9739 - Caterpillar

Illustration 1 g03342819The push roller can be adjusted to four different positions in relation to the front frame of the machine. The push roller can be adjusted by removing the pin.Remove the pin and adjust the push roller. Once the push roller has been adjusted to the desired position, reinstall the pin.When the push roller is adjusted away from the machine, the oscillation stops must also be adjusted.
Illustration 2 g03342820
Oscillation stops
In order to place the push roller in the desired position, movement of the oscillation stops from the oscillation position to the storage position may be necessary. Movement of the oscillation stops will vary depending on the configuration of the machine.Note: The frame for the push roller must be supported with the proper equipment in order to move the push roller to a new position.Note: The push roller and the oscillation stop blocks must be checked for clearance. Adjustment of the push roller and the oscillation stop blocks may be necessary. The adjustments will depend on the optional ballast and the grade and slope support brackets that are installed.