HOOD ASSEM. 8D4687 - Caterpillar

Secure 283-0658 Cable As (23) to 425-0487 Front Harness As (40) and 450-1096 Chassis Harness As (43) with 9M-8406 Clip (30) and 353-7956 Grommet (24), using existing hardware.
Illustration 22 g03810119
Illustration 23 g03810120
Illustration 24 g03810121
Secure 283-0658 Cable As (23) to 450-1096 Chassis Harness As (43) with 9M-8406 Clip (30) and 353-7956 Grommet (24), using existing hardware.
Illustration 25 g03810122
(44) 431-9640 Plate As
Remove knockout on 431-9640 Plate As (44).
Illustration 26 g03810123
(45) 367-5241 Enclosed ROPS Gp
Install 333-8153 Electronic Connector Gp (16) in to 431-9640 Plate As (44).
Secure 283-0658 Cable As (23) to 425-0487 Front Harness As (40) with 7K-1181 Cable Strap (14).
Illustration 27 g03810124
Rear of Cab
(46) 452-8518 Cab Harness As
Illustration 28 g03825886
(47) Object Detection Display
(48) Display and Camera Harness
(49) Machine Information Display
Connect 320-9715 Cable As (13) to 333-8153 Electronic Connector Gp (16).
Illustration 29 g03810125
Secure 320-9715 Cable As (13) to 452-8518 Cab Harness As (46) with 7K-1181 Cable Strap (14).
Illustration 30 g03810126
(50) 448-6966 Cable As
(51) 371-9551 Cover As
Connect 320-9715 Cable As (13) to 448-6966 Cable As (50).
Remove the original video harness and install 448-6966 Cable As (50) to the video input connector on the back of the display. The front camera will be connected to “CAM 3” and the rear will be connected to “CAM 1” of the 448-6966 Cable As.
After the physical installation is complete the Object Detection software must be configured to add the second video input.
Connect to the display using Caterpillar Electronic Technician and enter the Object Detection Configuration Menu.
Illustration 31 g03825887
Select "Camera System" and set the "Camera #1 Location" to "Rear" and the "Camera #2 Location" to "Front". Cycle power to save the changes. Installation of the system is now complete.