HOOK AS 1869531 - Caterpillar

1869531 HOOK AS Caterpillar parts R1300, R1300G, R1300G II, R1600, R1600G, R1700G

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1869531
186-9531
1869531

Weight: 215 pounds 97 kg.

Buy HOOK AS 1869531 Caterpillar genuine, new aftermarket tractor parts with delivery
LOAD HAUL DUMP,

Compatible equipment models: 1869531:

LOAD HAUL DUMP R1300 R1300G R1300G II R1600 R1600G R1700G Caterpillar

Number on catalog scheme: 1

Caterpillar 1869531 Parts scheme HOOK AS

For full view, you need register

Information:

Specification
Table 1
"Machine Drift on a Slope - Check"
Drift mm (inch)
New Service Limit Actual
0 0 Introduction
Measuring the amount of drift of the machine on a slope will determine if there is a need to check the travel brake.Note: The machine configuration that is used during this test can affect the results of this test. Refer to Testing and Adjusting, "Operational Checks" for the machine configurations that were used for this test.Note: The relief valve pressure settings must be set to the relief valve pressure specification before performing this operational check. Refer to Testing and Adjusting, "Specifications".Required Tools
Table 2
Description Qty
Stopwatch 1
Scale 150 mm (6 inch) 1 Test Procedure
Illustration 1 g06248932
Place the machine on a slope of 12 degrees. The surface of the slope must be hard and smooth.
Position the implements, as shown. Refer to Illustration 1.
The bucket should be empty.
Illustration 2 g06248964
To indicate the relative position of the machine to the slope, mark both the track and the track roller frame. Refer to Illustration 2.
Stop the engine.
Measure the machine movement on the slope after 3 minutes.