HOOK 2258227 - Caterpillar

Remove divider plate (60) .
Illustration 41 g00589662
Remove two O-ring plugs (61) from divider plate (50). Remove O-ring seals (not shown) from O-ring plugs (61) .
Illustration 42 g00589664
Illustration 43 g00589666
Remove three locknuts (65) and the washers (64) that secure three coil assemblies (63). Remove three coil assemblies (63) from the cartridge assemblies (66). Remove three cartridge assemblies (66) from bottom manifold (62) .
Illustration 44 g00589618
Remove O-ring seals (67), (68), and (69) from cartridge assembly (66). Remove backup rings (70) and (71) from cartridge assembly (66) .
Illustration 45 g00589668
Remove plug (72) from bottom manifold (62) .
Illustration 46 g00589669
Remove O-ring seals (73) and (74) from plug (72) .
Illustration 47 g00589671
Remove two bolts (76) that secure cover (75) to bottom manifold (62). Remove cover (75) from bottom manifold (62) .
Illustration 48 g00589672
Remove O-ring seal (77) from cover (75) .
Illustration 49 g00589674
Remove stop (78) from bottom manifold (62) .
Illustration 50 g00589677
Remove selector spool (79) from bottom manifold (62) .
Illustration 51 g00589678
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tool (A) in order to remove retaining ring (80) from selector spool (79) .
Illustration 52 g00589680
Remove two retainers (81) and spring (82) from selector spool (79) .
Illustration 53 g00589683
Illustration 54 g00589685
Use a suitable drift to remove the dowel (not shown) that secures stop (83) in bottom manifold (62). Remove stop (83) from bottom manifold (62) .