parts catalog

HOOK AS 3236644 - Caterpillar

3236644 HOOK AS Caterpillar parts 385C L MH HOOK
Alternative (cross code) number:
Caterpillar 3236644 HOOK AS

Buy HOOK AS 3236644 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 3236644:

EXCAVATOR  385C L MH   Caterpillar
Number on catalog scheme: 15
  For full view, you need register


Installation Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01291038
Attach a suitable lifting device to track drive motor (4). The weight of the track drive motor is approximately 68 kg (150 lb). Position track drive motor (4) and install bolts (3) .
Illustration 2 g01291037
Connect all hose assemblies (1) and harness assembly (2) .End By:
Lower the cab. Refer to Disassembly and Assembly, "Cab - Tilt".
Install the front bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Remove and Install".

Caterpillar parts catalog:

Caterpillar parts catalog
385C Material Handler WAW00001-UP (MACHINE) POWERED BY C-18 Engine

Parts hook Caterpillar catalog:

1519455 HOOK
350, 365B, 365B L, 385B
0938603 HOOK
E110, E120, E140, E180, E240, E300, E450, E650, E70
0938554 HOOK
E110, E120, E140, E180, E240, E300, E450, E650, E70
0960696 HOOK
E110, E120, E140, E180, E240, E300, E70
3043770 HOOK AS
336E, 336E L, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L
3043765 HOOK AS
336E, 336E L, 345D L, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.