HOOK 4645097 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     140-7742     Sleeve     4    
Illustration 1 g02574116
Attach a suitable lifting device to hydraulic tank (13). The weight of hydraulic tank (13) is approximately 150 kg (330 lb). Use the suitable lifting device in order to position hydraulic tank (13) .
Install the mount and washers (18). Install the washers and bolts (17) .
Illustration 2 g02573277
Install mount (14) and washer (15). Install the washer and bolt (16) .
Illustration 3 g02573177
Install covers \ (12) .
Illustration 4 g02572158
Illustration 5 g02572116
Attach Tooling (A) and a suitable lifting device to panel assembly (11). The weight of panel assembly (11) is approximately 27 kg (60 lb). Use Tooling (A) and the suitable lifting device in order to position panel assembly (11) to the machine. Remove Tooling (A) and the suitable lifting device in order to position panel assembly (11) into place and install the bolts.
Illustration 6 g02572079
Install cover (10). Install hand rails (9) and the toe guards.
Illustration 7 g02572016
Install sensor (8). Tighten sensor (8) to a torque of 22 3 N m (195 27 lb in). Install sensor (5). Tighten sensor (5) to a torque of 20 5 N m (177 44 lb in). Connect harness assemblies (7). Attach cable straps (6) .
Illustration 8 g02571842
Connect hose assemblies (4) and hose assemblies (3) .
Illustration 9 g02350965
Connect hose assemblies (2) .
Illustration 10 g02350964
Connect hose assemblies (1) .
Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.End By: Connect the steering frame lock.