5T1935 HORN GP-AIR Caterpillar parts
776C, 776D, 777B, 777D
Rating:
Alternative (cross code) number:
CA5T1935
5T-1935
5T1935
CA5T1935
5T-1935
5T1935
TRACTOR, TRUCK,
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01182395
Disconnect hose (1) from cover (2) .
Remove bolts (3) .
Remove cover (2) and gasket (4) .
Remove water temperature regulators (5) from the water temperature regulator housing.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01182395
Position water temperature regulators (5) in the water temperature regulator housing.
Install a new gasket (4) and cover (2) .
Install bolts (3) .
Connect hose (1) to cover (2) .
Fill the cooling system with coolant to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01182395
Disconnect hose (1) from cover (2) .
Remove bolts (3) .
Remove cover (2) and gasket (4) .
Remove water temperature regulators (5) from the water temperature regulator housing.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01182395
Position water temperature regulators (5) in the water temperature regulator housing.
Install a new gasket (4) and cover (2) .
Install bolts (3) .
Connect hose (1) to cover (2) .
Fill the cooling system with coolant to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Caterpillar SIS machinery equipment:
Caterpillar SIS
776B TRACTOR & 777B TRUCK 4YC00001-UP (MACHINE) POWERED BY 3508 ENGINE »
5T-1935
HORN GP-AIR
777C Truck 776C Tractor 2TK00001-UP (MACHINE) POWERED BY 3508 Engine »
5T-1935
HORN GP-AIR
776D Tractor 5ER00001-UP (MACHINE) POWERED BY 3508B Engine »
5T-1935
HORN GP-AIR
777D Truck 3PR00001-UP (MACHINE) POWERED BY 3508 Engine »
5T-1935
HORN GP-AIR
777D HAA Off-Highway Truck 2YW00001-UP (MACHINE) POWERED BY 3512B Engine »
5T-1935
HORN GP-AIR
776D Tractor AFS00001-UP (MACHINE) POWERED BY 3508B Engine »
5T-1935
HORN GP-AIR
777D Off-Highway Truck AGC00001-UP (MACHINE) POWERED BY 3508B Engine »
5T-1935
HORN GP-AIR
777D Truck AGY00001-UP (MACHINE) POWERED BY 3512B Engine »
5T-1935
HORN GP-AIR
777D Off-Highway Truck FKR00001-UP (MACHINE) POWERED BY 3508B Engine »
5T-1935
HORN GP-AIR
Caterpillar parts catalog:
Parts horn Caterpillar catalog:
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 16H NA, 5130, ...
9D4800
HORN GP-AIR
768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776, 776C, 776D, 777, 777B, 777D
768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776, 776C, 776D, 777, 777B, 777D
5D6993
HORN
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 16H NA, 5130, ...
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 16H NA, 5130, ...
3776536
HORN GP-ELECTRIC
320D, 320D FM, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 326D L, 328D LCR, 329D, 329D L, 336D, 336D L, 336D2, 336D2 L
320D, 320D FM, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 326D L, 328D LCR, 329D, 329D L, 336D, 336D L, 336D2, 336D2 L
2340417
HORN GP-ELECTRIC
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B
TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B
320D, 320D FM, 320D L, 320D LRR, 320D RR, 321D LCR, 323D L, 324D, 324D FM, 324D FM LL, 324D L, 325D FM, 325D FM LL, 325D L, 325D MH, 329D L, 330D FM, 330D L, 336D, 336D L, 336D LN, 345C, 345C L, 345C ...
4V3509
HORN GP-AIR
950B, 950B/950E, 950F, 950F II
950B, 950B/950E, 950F, 950F II
5W5860
HORN GP-AIR
205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 224B, M312, M315, M318, M320
205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 224B, M312, M315, M318, M320
5T1282
HORN GP-AIR
621E, 623E, 627E
621E, 623E, 627E
1434522
HORN GP-ELECTRIC
416C, 426C, 436C
416C, 426C, 436C
2784310
HORN GP-ELECTRIC
320D, 320D FM, 324D FM, 324D FM LL, 325D FM, 325D FM LL, 325D MH, 330D, 330D FM, 330D MH, 568 FM LL
320D, 320D FM, 324D FM, 324D FM LL, 325D FM, 325D FM LL, 325D MH, 330D, 330D FM, 330D MH, 568 FM LL
5A6603
HORN GROUP
941, 951B
941, 951B
2954371
HORN GP-ELECTRIC
120K, 120K 2, 12K, 140K, 140K 2, 160K
120K, 120K 2, 12K, 140K, 140K 2, 160K
2872572
HORN GP-ELECTRIC
CP-44, CP-56, CP-64, CP-76, CS-44, CS-54, CS-56, CS-64, CS-74
CP-44, CP-56, CP-64, CP-76, CS-44, CS-54, CS-56, CS-64, CS-74
5V0007
HORN GP-AIR
936, 936F, G936
936, 936F, G936