HOSE ASSY., 1/4" JIC. X 26" 0021004 - Caterpillar

0021004 HOSE ASSY., 1/4" JIC. X 26" Caterpillar parts WE-601B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA0021004
002-1004
0021004

Caterpillar 0021004 HOSE ASSY., 1/4" JIC. X 26"

Buy HOSE ASSY., 1/4" JIC. X 26" 0021004 Caterpillar genuine, new aftermarket tractor parts with delivery
WINDROW ELEVATOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

24 May 2023
2.4912[1.12] Pounds
US: Marketplace Pro

Factor 55 00210-04 Winch Shackle Mount
Factor 55 Working Load Limit of 24,000 pounds || Fits all steel cables and synthetic ropes up to ½ inch diameter || EPDM "Rubber Guard" protects alloy Hawse fairleads || Simple snap ring shear pin retainment || 5 inches tall and 4 inches in diameter

24 May 2023

US: Marketplace Pro

Factor 55 0021004 Prolink Xxl - Black
FACTOR55 Working Load Limit of 24,000 pounds || Fits all steel cables and synthetic ropes up to ½ inch diameter || EPDM "Rubber Guard" protects alloy Hawse fairleads || Simple snap ring shear pin retainment || 5 inches tall and 4 inches in diameter

24 May 2023
2.4912[1.12] Pounds
US: Marketplace Pro

Factor 55 0021004 Shackle Mount
Factor 55 All Factor 55 products are designed in house using the latest 3D CAD software and optimized using Cosmos FEA (Finite Element Analysis) || Before we release any products to the public, we also perform a destructive test on each design with the assistance of a test facility equipped with test measurement and data recording equipment || From 6000 and 7000 series aluminums, to 6AL-4V titanium double shear pins, Factor 55 offers the very best designs made from the very best materials || Factor 55 wants to make sure we are producing the highest quality, best value products for our customers || Factor 55 parts are conducted at a test and measurement facility that is also certified for National Defense Department rigging and hoist testing

Number on catalog scheme: 18

Caterpillar 0021004 Parts scheme HOSE ASSY., 1/4" JIC. X 26"

For full view, you need register

Compatible equipment models: 0021004:

WINDROW ELEVATOR WE-601B Caterpillar

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Cap 1 Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure - Release".
Illustration 1 g01397769
Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply 138 kPa (20 psi). This procedure will pull a vacuum on the hydraulic system.
Illustration 2 g01401365
Typical Example
Personal injury can result from the sudden release of high pressure oil.Be sure the engine has been shut off for a minimum of five minutes to ensure that the accumulator pressure is zero.The accumulator is filled with dry nitrogen. Do not loosen or remove the valve or the cap from the top of the accumulator.
Disconnect harness assembly (1).
Remove nut (2), washer (3), and coil assembly (4).
Illustration 3 g01401369
Typical Example
Remove cartridge assembly (5). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Cap 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g01401369
Typical Example
Install cartridge assembly (5). Tighten cartridge assembly (5) to a torque of 25 5 N m (18 4 lb ft).
Illustration 5 g01401365
Typical Example
Install coil assembly (4), washer (3), and nut (2). Tighten nut (2) to a torque of 9.5 1.5 N m (84 13 lb in).
Connect harness assembly (1).
Illustration 6 g01397769
Remove Tooling (A). End By:
Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".