AVSPARE.COM
parts catalog

HOSE AS 0544326 - Caterpillar



0544326 HOSE AS Caterpillar parts G3512, G3516 HOSE
Rating:
63
Alternative (cross code) number:
CA0544326
054-4326
0544326
Caterpillar 0544326 HOSE AS
Weight: 20 pounds 9 kg.

Buy HOSE AS 0544326 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE,

Compatible equipment models: 0544326:

GAS ENGINE  G3512   G3516   Caterpillar
Number on catalog scheme: 22
  
  For full view, you need register

Information:


Illustration 1 g02511756
Install Tooling (A) in position on the cylinder head in order to compress appropriate valve spring (3).
Ensure that the valve spring is compressed squarely or damage to the valve stem may occur.
Apply sufficient pressure to Tooling (A) in order to remove valve keepers (1). Note: Do not compress the spring so that valve spring retainer (2) touches valve stem seal (4).
Slowly release pressure on Tooling (A).
Illustration 2 g02511676
Place a temporary identification mark on valve spring (3) in order to identify the correct position.
Remove valve spring retainer (2). Remove valve spring (3).
Repeat Step 4 through Step 8 for the remaining valves.
Remove Tooling (A).
Remove valve stem seals (4).
Use a suitable lifting device in order to carefully turn over the cylinder head.
Remove valves (5). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 9U-6195 Valve Spring Compressor 1
268-1969 Adapter 1
276-1221 Head 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The valves have a hard surface finish. Grinding compound must not be used on the valves. Grinding compound will damage the hard surface finish of the valves.
Clean all components of the cylinder head assembly. Ensure that all ports, all coolant passages, and all lubrication passages in the cylinder head are free from debris. Follow Step 1.a through Step 1.d in order to inspect the components of the cylinder head assembly. Replace any components that are worn or damaged.
Inspect the cylinder head for wear and for damage. Refer to System Operation, Testing and Adjusting, "Cylinder Head Inspect" for the correct procedure.
Inspect the valve seats for wear and for damage. Refer to Specifications, "Cylinder Head Valves" for further information.
Inspect the valve guides for wear and for damage. Refer to Specifications, "Cylinder Head Valves" and System Operation, Testing and Adjusting, "Valve Guide - Inspect" for further information.
Inspect the valves for wear and for damage. Refer to Specifications, "Cylinder Head Valves" for further information.
Inspect valve springs (3) for damage and for the correct length. Refer to Specifications, "Cylinder Head Valves " for further information.
Illustration 3 g02511676
Lubricate the stems of valves (5) with clean engine oil. Install valves (5) in the appropriate positions in the cylinder head. Check the depth of the valves below the face of the cylinder head. Refer to System Operation, Testing and Adjusting, "Valve Depth - Inspect" for more information.
Use a suitable lifting device in order to carefully turn over the cylinder head. The weight of the cylinder head is approximately 65 kg (143 lb). Note: Ensure that all of the valves remain in place.
Install new valve stem seals (4) onto each of the valve guides. Note: The outer face of the valve guides must be clean and dry before installing valve stem seals (4).
Install valve spring (3) onto the cylinder head. Position valve spring retainer (2) on valve spring (3).
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring

Caterpillar parts catalog:

Caterpillar parts catalog
G3516 Engine Electronic Ignition System 4EK00001-UP
G3516 Engine Electronic Ignition System 8LD00001-UP
G3512 ENGINE 7NJ00001-UP
G3512 Gas Engine Electronic Ignition System 5JD00001-UP


Parts hose Caterpillar catalog:

3P6048 HOSE AS
3176B, 3176C, 3196, 3304, 3306, 3306B, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3508, 3508C, 3512, 3516, 3516B, 3606, 3608, 3612, 3616, 613B, 613C, 627F, 627G, 637E, ...
4W4536 HOSE AS
3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408E, 3412, 3412E, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, C-10, C-12, C-15,...
6N3169 HOSE AS
1673C, 3304, 3306, 3406C, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 3412E, 3508, 3512, 3516, 589, 631D, 631E, 631G, 637D, 637E, 637G, 651E, 657E, 769C, 771C, 773B, 775B, 834B, 988B, 988F, 990, 992C, 992...
6N8659 HOSE AS
225D, 3116, 3208, 3406, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 3618, C18, C280-12, C280-16, C280-6, C280-8, C30, C3...
8N1186 HOSE AS
3412, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3508, G3512, G3516, PM3412, PM3508, TH48-E80
2V8571 HOSE AS
215, 225, 225D, 227, 229, 229D, 231D, 235, 245, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3618, 5130, 793B, G3508, G3512, G3516, PM3508, PM3512, PM3516, PP3516, SPF343, SPS343, SPT34...
9F2638 HOSE AS
120G, 12G, 140G, 303.5, 304.5, 312, 3126, 312E, 313B, 314E CR, 316E L, 320E RR, 324E, 329E, 3304B, 3306, 3306B, 336E, 3406, 3406C, 3406E, 3408E, 3412, 3412C, 3412E, 350, 3508, 3508B, 3512, 3512B, 3516...
2H7551 HOSE AS
1673, 3412, 3508, 3512, 3516, D379B, D398B, G3516, G379, G399, PM3412, PM3508, PM3512, PM3516, PMG3516, PP3516
9G2653 HOSE AS
3406C, 3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C, 3618, 5130B, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 789, 789B, 789C, 793C, 797, 797B, 994D, C7, D7H, G3508, G3512, G3516, G3516B, G352...
5P1472 HOSE
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3516, PM3508, PM3512, PM3516, PMG3516, PP3516, SPF343, SPF343C, SPS343, SPT343
8N8741 HOSE
3508B, 3512B, 3512C, 3516, 3516B, 3516C, 621B, 621G, 623G, 627F, 627G, D10, D10T2, D8N, D8R, D8T, G3516, G3516B, G3520B, PM3516, PMG3516, PP3516, SM-350
1843229 HOSE AS
3508B, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789C, 793C, 793D, 797, 797B, 854G, 992G, D11N, D11R, G3508, G3512, G3516, PM...
9V0471 HOSE AS
G3512, G3516, IT28
8V8879 HOSE AS
814B, 815B, G3512, G3516
1650016 HOSE
621G, 966F II, G3516
7D3672 HOSE AS
16G, 650B, 666B, G3512, G3516
3052655 HOSE AS
G3508, G3612, G3616
7C9647 HOSE
3176B, 621E, 621F, 623E, 623F, 627E, 627F, D11T
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.