HOSE 0858052 - Caterpillar

Improper lifting or tiedowns can allow load to shift and can cause injury and damage.
Illustration 1 g03790994Note: The weights listed on the shipping film do not include fuel or an operator.For the basic specifications of the machine, refer to the Operation and Maintenance Manual, "Specifications".The weight of the machine in this section pertains to the units that are manufactured by Caterpillar, Inc. This information refers to the unit that is manufactured by Caterpillar, Inc.
Lifting Mass - The lifting mass indicates the maximum weight of the machine without any work tools.
Lifting Point - In order to lift the machine, attach the lifting devices to the four lifting points.
Tie Down Point - In order to tie down the machine, attach the tie-downs to the tie down points.Lifting the Machine
Illustration 2 g03791034Use properly rated cables and properly rated slings in order to lift the machine.Position the crane or the lifting device in order to lift the machine in a level position.The width of the spreader bar must be sufficient to prevent the lifting cables or the lifting straps from contacting the machine.
In order to gain access to the front lifting eyes, raise the front hopper.
Place the cables in the four lifting eyes that are provided. These lifting eyes are identified on the machine by a symbol of a hook.
Refer to the Operation and Maintenance Manual, "Shipping the Machine" for more information. Tying Down the Machine
Illustration 3 g03791060
Block the tracks.
Place cables in the eight tie down points that are provided.
Refer to the Operation and Maintenance Manual, "Shipping the Machine" for more information.