HOSE KIT 0940855 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
(A)     132-8223     110 volt Power Pack (1)     1    
1U-6221 Torque Wrench     1    
132-8143 36 mm Hex Link     1    
(B)     138-7573     Link Bracket     4    
( 1 ) 132-8231 220 volt Power Pack is available.
The following installation procedure is identical for both swing drives.
Thoroughly clean the mating surfaces of the swing drive housing and the main frame.
Apply 5P-3931 Anti-Seize Compound on the locating pin in the main frame. Also, apply 5P-3931 Anti-Seize Compound in the pin bore in the main frame.
Apply 1U-8846 Sealant on the mating surface of the main frame and the swing drive housing.
Illustration 1 g00635629
Note: During installation, the locating pin for the swing drive can come out of the swing drive housing.
Fasten Tool (B) and a hoist to swing drive (3). The weight of the swing drive is 227 kg (500 lb). Place the swing drive in the swing drive's original position in the main frame. If the locating pin comes out of the swing drive housing, the locating pin can be reinstalled with a hammer after the swing drive is in place.
Illustration 2 g00635627
Apply 9S-3263 Thread Lock Compound on the threads of bolts (1). Install the bolts and the washers that hold the swing drive in place. Tighten the bolts evenly with Tooling (A) to a torque of 900 100 N m (665 75 lb ft).
Install two corks (2) in the threaded holes in the swing drive housing.
After installation of the swing motor, fill the hydraulic oil tank and the swing drive with oil to the proper level.Reference: Refer to Operation and Maintenance Manual, "Lubricant Viscosities" for the proper oil viscosity.Reference: Refer to Operation and Maintenance Manual, "Refill Capacities" for the correct amount.Reference: Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" for the correct filling procedures.Reference: Refer to Operation and Maintenance Manual, "Swing Drive Oil Level - Check" for the correct filling procedures.End By: Install the swing motor. Refer to Disassembly and Assembly, "Swing Motor - Install" in this manual.