HOSE AS 1011497 - Caterpillar

This Program can be administered either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS40060" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and use "T" as the SIMS Description Code. If administered after failure, use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.
Although this Program is to be administered as described above on the Affected Product, parts should be removed from Parts Stock as soon as possible.
If the dealer has installed either a 1538464, 1641944, 1493194, 1538465 or 1641943 Control Group, this program should not be applied.
Termination Date
February 29, 2001Problem
An improved implement control group needs to be installed on certain 824G, 825G and 826G Wheel Loaders. The current implement control group does not have a mechanical detent for float. The new implement control group will provide the mechanical detent and improved life of the internal components.
Affected Product
Model & Identification Number
824G (4SN1-389)
825G (6RN1-335)
826G (7LN1-362)
Parts Needed
4 - 8T4138 Bolt1 - 1576999 Support Assembly1 - 1723940 Control Group - Single Function (825G and 826G)1 - 1723941 Control Group - Two Function (825G and 826G)1 - 1723942 Control Group - Three Function (824G only)Action Required
Affected Product
Replace the implement control group with one of the new ones. Calibrate the implement controls following the procedure in SENR5891-02 'Electronic Implement Control System'.
Parts Stock
Remove all 1228109, 1228110 and 1228111 Control Groups from Parts Stock.
Service Claim Allowances
Affected Product
This is a 2-hour job.
Parts Stock
Submit one claim for all 1228109, 1228110 and 1228111 Control Groups removed from Parts Stock.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.