HOSE,FUEL 1040578 - Caterpillar

Caterpillar Electronic Technician (ET)
Cat ET can be used by the technician to help perform the following procedures:
Diagnostic testing
Configuration of the PL241 radio
Print various reportsCat ET can display the following information:
Status parameters
Event codes
Diagnostic codes
Radio settingsAlways use the latest version of Cat ET. The media is available on CD and the media can also be downloaded from various Caterpillar web sites.Once you have downloaded Cat ET onto your PC, you will need a license from your Caterpillar dealer to use the software. Various licenses are available for different users with different requirements. Consult your Caterpillar dealer.Note: For more information regarding the use of Cat ET and PC requirements, refer to the documentation that accompanies your Cat ET software.Connecting Cat ET
Connecting the Communication Adapter
Table 1 lists the standard hardware that is required to connect Cat ET.
Table 1
Standard Hardware for Connecting with Cat ET
Part Number Description
N/A Personal Computer (PC)
245-7310 Control Harness As
370-8059 Adapter Kit Follow the instructions for the communication adapter. Use the following procedure to connect Cat ET and the communication adapter to a PC.
Remove the electrical power from the ECM.
Connect the 245-7310 Control Harness As and the 370-8059 Adapter Kit to the three-pin serial service port of the PL241 harness and your laptop.
Restore electrical power to the ECM.
Establish communication between Cat ET and the ECM.
If Cat ET does not communicate with the ECM, refer to Troubleshooting, "Electronic Service Tool Does Not Communicate".