HOSE AS 1082937 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-8665 Cylinder Liner Puller 1
B 6V-4133 Wedge Bracket 1 Start By:
Remove the pistons and the connecting rod assemblies.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00578729
Typical example
Drain the coolant from the cooling system into a suitable container for storage or disposal.
Place a cover on the crankshaft journals in order to shield the journals from dirt and coolant.
Install Tool (A) and (B) in order to remove the cylinder liner.
Illustration 2 g00578731
Typical example
Remove seals (1) and filler band (2) from the cylinder liner.