HOSE 1095352 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     QTY    
A     FT-3154     Modified Socket     1    
B     9S-3263     Thread Lock Compound     -    
Illustration 1 g02000960
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Install bolt (14) . Apply Tooling (B) to ring (13) . Use Tooling (A) in order to install ring (13) . Install valve (12) , and spring (11) .
Install valve stop (10) .Note: Turn valve stop (10) clockwise until the number of threads on bolt (14) measured during the disassembly procedure is protruding from valve stop (10) .
Install nut (9) . Tighten nut (9) against valve stop (10) to a torque of 9 1 N m (80 8.9 lb in).Note: Do not allow valve stop (10) to turn while tightening nut (9) as doing so will affect the relief valve setting.
Illustration 2 g02000618
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Install bolt (7) . Apply Tooling (B) to ring (6) . Use tooling (A) in order to install ring (6) . Install retaining ring (5) , valve (4) , and spring (3) .
Install valve stop (2) in cooler bypass (8) .Note: Turn valve stop (2) clockwise until the number of threads on bolt (7) measured during the disassembly procedure is protruding from valve stop (2) .
Install nut (1) . Tighten nut (1) against valve stop (2) to a torque of 9 1 N m (80 8.9 lb in).Note: Do not allow valve stop (2) to turn while tightening nut (1) as doing so will affect the relief valve setting.End By: Install the check valve. Refer to Disassembly and Assembly, "Check Valve (Cooler Bypass) - Remove".