HOSE AS 1178316 - Caterpillar

Table 1
Required Parts    
Part Number     Description     QTY    
262-2875     Gear Pump Gp     1    
293-3541 or 287-8272     Power Train Software Gp     1    
6V-9001     Elbows     2    
6V-8624     Elbow     1    Adaptable To: The new 262-2875 Gear Pump Gp (Brake, Hydraulic Fan) replaces the former 205-3665 Gear Pump Gp (Brake, Hydraulic Fan). The new gear pump group is part of the 203-3898 Brake and Hydraulic Fan Pump and Mounting Gp .
Check SIS for the latest version of the flash software.
Table 2
Available Flash Files    
Part number     Sales Model     Serial Number    
293-3541
Non-Programmable neutralizer switch     924GZ     S/N:DFZ1-UP    
S/N:WGX1-800
S/N:RTA1-324
924G S/N:DDA1-1747    
S/N:WMB1-830
S/N:RBB1-733
928G S/N:DJD1-1672    
S/N:WLG1-732
IT28G S/N:DBT1-UP    
IT28G DV S/N:EFW1-356    
           
287-8272
Programmable neutralizer switch     924GZ     S/N:WGX801-918    
S/N:RTA325-518
924G S/N:DDA1748-2277    
S/N:WMB831-966
S/N:RBB734-1117
928G S/N:DJD1673-2015    
S/N:WLG733-833
IT28G DV S/N:EWF357-419    
930G S/N:TFW1-291    
S/N:TWR1-705
Flash the new software.
Configure the solenoid as NOT INSTALLED.Note: The configuration for the solenoid is found under the Transmission ECM either in Configuration Group 2 as EBC Install State or in Drivetrain Configuration as Brake Accumulator Charging System Installation Status. The solenoid must be connected when the solenoid is configured as NOT INSTALLED. The solenoid must be connected when the software is flashed.
Illustration 1 g01290316
(1) 262-2875 Gear Pump Gp (Brake, Hydraulic Fan) (2) 6V-9001 Elbows (3) 6V-8624 Elbow
Install the two 6V-9001 Elbows (2) and the 6V-8624 Elbow (3) on the 262-2875 Gear Pump Gp (Brake, Hydraulic Fan) (1) .
Replace the 205-3665 Gear Pump Gp (Brake, Hydraulic Fan) with the 262-2875 Gear Pump Gp (Brake, Hydraulic Fan).Note: The new 262-2875 Gear Pump Gp (Brake, Hydraulic Fan) does not have a solenoid. You should cap the connector and you should tie the harness out of the way.The new 262-2875 Gear Pump Gp (Brake, Hydraulic Fan) became effective in production with the following machines: DDA2278-UP, RBB1118-UP, RTA519-UP, WGX919-UP, WMB967-UP, DJD2016-UP, WLG834-UP, TFW292-UP, TWR706-UP and EWF420-UP