1241701 HOSE-UPPER Caterpillar parts
330B, 330B L
Rating:
Alternative (cross code) number:
CA1241701
124-1701
1241701
CA1241701
124-1701
1241701
Weight: 2 pounds 0 kg.
EXCAVATOR,
You can buy:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
124-1701 1241701 Upper Hose Compatible With Caterpillar Track Excavator 30BLN 330BL 330B Excavator 330B L 330B LN Engine 3306
ZMYXDTOS - Compatible with Caterpillar Track Excavator 30BLN 330BL 330B Excavator 330B L 330B LN Engine 3306 || - Part Number : 124-1701 1241701 || - Efficient dissipation: The car radiator adopts advanced heat dissipation technology to avoid performance degradation and damage caused by overheating || - Reduce noise pollution: The engine radiator design is reasonable, resulting in low noise during operation and providing a peaceful driving environment || - Keep the temperature stable. It can effectively control the temperature within the appropriate range operating temperature range of the engine, and a stable temperature contributes to the fuel economy and power output of the engine.
ZMYXDTOS - Compatible with Caterpillar Track Excavator 30BLN 330BL 330B Excavator 330B L 330B LN Engine 3306 || - Part Number : 124-1701 1241701 || - Efficient dissipation: The car radiator adopts advanced heat dissipation technology to avoid performance degradation and damage caused by overheating || - Reduce noise pollution: The engine radiator design is reasonable, resulting in low noise during operation and providing a peaceful driving environment || - Keep the temperature stable. It can effectively control the temperature within the appropriate range operating temperature range of the engine, and a stable temperature contributes to the fuel economy and power output of the engine.
Upper Hose 124-1701 1241701 For CAT Excavator 330B L 330B LN Track Excavator 30BLN 330BL 330B Engine 3306 New Aftermarket Parts
GENERIC Package included:Upper Hose*1 || Feature: Stable characteristics, high reliability. || We offer free repair or return or exchange service in the warranty. || Tips: Please check the old part number or the model of the applicable machine before purchasing! || Warm reminder: We will provide comprehensive after-sales service and technical support to ensure that any issues encountered during use can be resolved promptly. Thank you.
GENERIC Package included:Upper Hose*1 || Feature: Stable characteristics, high reliability. || We offer free repair or return or exchange service in the warranty. || Tips: Please check the old part number or the model of the applicable machine before purchasing! || Warm reminder: We will provide comprehensive after-sales service and technical support to ensure that any issues encountered during use can be resolved promptly. Thank you.
2PCS Upper Hose 124-1701 1241701 For CAT Excavator 330B L 330B LN Track Excavator 30BLN 330BL 330B Engine 3306 New Aftermarket Parts
YYBMBFBYQ Package included:Upper Hose*2 || Feature: Stable characteristics, high reliability. || We offer free repair or return or exchange service in the warranty. || Tips: Please check the old part number or the model of the applicable machine before purchasing! || Warm reminder: We will provide comprehensive after-sales service and technical support to ensure that any issues encountered during use can be resolved promptly. Thank you.
YYBMBFBYQ Package included:Upper Hose*2 || Feature: Stable characteristics, high reliability. || We offer free repair or return or exchange service in the warranty. || Tips: Please check the old part number or the model of the applicable machine before purchasing! || Warm reminder: We will provide comprehensive after-sales service and technical support to ensure that any issues encountered during use can be resolved promptly. Thank you.
This part in 2 request:
Show.
This information for suppliers only!
2019-05-15
2019-05-15
Number on catalog scheme:
3
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-2241 Camshaft Bearing Tool Group 1
B 9U-7222 Camshaft Bearing Pilot 1
8M-8778 Taperlock Stud
1/2 - 13 by 1 9/16 inch 1
C 9U-7210 Puller Plate 1
D 9U-7223 Alignment Bushing 1
E 9U-7213 Backup Plate 1
0S-1621 Bolt
1/2 - 13 by 1 inch 1
F 9U-7214 Spacer Plate 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01159754
Install the No. 7 camshaft bearing (rear), as follows:
Insert the large end of Tooling (B) into the No. 7 camshaft bore.
Position Tooling (C) over Tooling (A). Install Tooling (A) through the cylinder head on Tooling (B) .
Position camshaft bearing (1) on Tooling (B). Install Tooling (E) on Tooling (B) .Note: Refer to Specifications, "Cylinder Head" for appropriate information for the orientation of the camshaft bearings in the cylinder head.
Use Tooling (A) in order to pull camshaft bearing (1) into the camshaft bore.Note: When the chamfer of Tooling (E) contacts the face of the camshaft bore, the camshaft bearing is properly installed.
Illustration 2 g01159756
Install the No. 6 through No. 2 camshaft bearings, as follows:
Insert the large end of Tooling (B) into the camshaft bore.Note: Use Tooling (D) to align Tooling (A) and Tooling (B) with the camshaft bearing bores. Install Tooling (D) in the inside diameter of any installed camshaft bearing between Tooling (A) and Tooling (B) .
Install Tooling (A) on Tooling (B). Position camshaft bearing (1) on Tooling (B). Install Tooling (E) on Tooling (B) .Note: Refer to Specifications, "Cylinder Head" for appropriate information for the location and the orientation of the camshaft bearings in the cylinder head.
Use Tooling (A) in order to pull camshaft bearing (1) into the camshaft bore.Note: When the chamfer of Tooling (E) contacts the face of the camshaft bore, the camshaft bearing is properly installed.
Illustration 3 g01159758
Install the No. 1 camshaft bearing (front), as follows:
Insert the large end of Tooling (B) into the No. 1 camshaft bore. Assemble Tooling (A) and Tooling (D) on Tooling (B) .
Position camshaft bearing (1) on Tooling (B). Install Tooling (E) and Tooling (F) on Tooling (B) .Note: Refer to Specifications, "Cylinder Head" for appropriate information for the location and the orientation of the camshaft bearings in the cylinder head.Note: Tooling (F) is used to seat the No. 1 camshaft bearing to the correct depth in the camshaft bore.
Use Tooling (A) in order to pull the No. 1 camshaft bearing into the No. 1 camshaft bore. When the chamfer of Tooling (E) contacts the face of the camshaft bore, the camshaft bearing is properly installed.End By: Install the camshaft.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-2241 Camshaft Bearing Tool Group 1
B 9U-7222 Camshaft Bearing Pilot 1
8M-8778 Taperlock Stud
1/2 - 13 by 1 9/16 inch 1
C 9U-7210 Puller Plate 1
D 9U-7223 Alignment Bushing 1
E 9U-7213 Backup Plate 1
0S-1621 Bolt
1/2 - 13 by 1 inch 1
F 9U-7214 Spacer Plate 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01159754
Install the No. 7 camshaft bearing (rear), as follows:
Insert the large end of Tooling (B) into the No. 7 camshaft bore.
Position Tooling (C) over Tooling (A). Install Tooling (A) through the cylinder head on Tooling (B) .
Position camshaft bearing (1) on Tooling (B). Install Tooling (E) on Tooling (B) .Note: Refer to Specifications, "Cylinder Head" for appropriate information for the orientation of the camshaft bearings in the cylinder head.
Use Tooling (A) in order to pull camshaft bearing (1) into the camshaft bore.Note: When the chamfer of Tooling (E) contacts the face of the camshaft bore, the camshaft bearing is properly installed.
Illustration 2 g01159756
Install the No. 6 through No. 2 camshaft bearings, as follows:
Insert the large end of Tooling (B) into the camshaft bore.Note: Use Tooling (D) to align Tooling (A) and Tooling (B) with the camshaft bearing bores. Install Tooling (D) in the inside diameter of any installed camshaft bearing between Tooling (A) and Tooling (B) .
Install Tooling (A) on Tooling (B). Position camshaft bearing (1) on Tooling (B). Install Tooling (E) on Tooling (B) .Note: Refer to Specifications, "Cylinder Head" for appropriate information for the location and the orientation of the camshaft bearings in the cylinder head.
Use Tooling (A) in order to pull camshaft bearing (1) into the camshaft bore.Note: When the chamfer of Tooling (E) contacts the face of the camshaft bore, the camshaft bearing is properly installed.
Illustration 3 g01159758
Install the No. 1 camshaft bearing (front), as follows:
Insert the large end of Tooling (B) into the No. 1 camshaft bore. Assemble Tooling (A) and Tooling (D) on Tooling (B) .
Position camshaft bearing (1) on Tooling (B). Install Tooling (E) and Tooling (F) on Tooling (B) .Note: Refer to Specifications, "Cylinder Head" for appropriate information for the location and the orientation of the camshaft bearings in the cylinder head.Note: Tooling (F) is used to seat the No. 1 camshaft bearing to the correct depth in the camshaft bore.
Use Tooling (A) in order to pull the No. 1 camshaft bearing into the No. 1 camshaft bore. When the chamfer of Tooling (E) contacts the face of the camshaft bore, the camshaft bearing is properly installed.End By: Install the camshaft.
Caterpillar parts catalog:
Parts hose Caterpillar catalog:
330, 330 FM L, 330 L, 3306, 3306C, 330B, 330B L, 350, 525, 527, 627B, 65C, 966F, 966F II, 972G, D250E, D250E II, D25D, D300E, D300E II, W330B
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 14M, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 1673C, 16H, 16M, 215B, 235B, 235D, 3176C, 3196, 330, 330 L...
12G, 12H, 12H ES, 12H NA, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306B, 330B, 330B L, 525, 527, 52...
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 1290T, 12H, 12H ES, 12H NA, 12K, 12M, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 160H, 160H ES, 160H NA, 160K...
307C, 312C, 312C L, 315C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 322 LN, 322B, 322B L, 322B LN, 322C, 325 LN, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 345B II, 345B L, 385B, 385C, 385C...
307C, 311C, 311D LRR, 312C, 312C L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B FM LL, 320C, 320D, 3...
307C, 308C, 311D LRR, 311F LRR, 312C, 312C L, 314D CR, 314D LCR, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D FM, 320D LRR, 320D RR, 32...
307C, 307D, 307E, 311C, 311D LRR, 311F LRR, 312D, 312D L, 314C, 314D LCR, 314E LCR, 320B, 320C, 320C FM, 320D, 320D L, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 322B, 322B LN...
308C, 311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314C, 315D L, 318D L, 318D2 L, 319D, 319D L, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D...
324D, 324D L, 324D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D2 L, 365B
320 L, 322 L, 322B, 325, 325 L, 325B L, 325C L, 330B L, 345B II, 345B L
330B, 330B L, 365C, 365C L, W330B
1962484
HOSE AS
330B L, W330B
330B L, W330B
1555480
HOSE AS
325B L, 330B L, M325B, W330B
325B L, 330B L, M325B, W330B
8E7372
HOSE AS
325B L, 330B L, 345B, 345B II MH, M325B, W330B, W345B II
325B L, 330B L, 345B, 345B II MH, M325B, W330B, W345B II
1554984
HOSE AS
325B L, 330B L, 345B, 345B II, 345B II MH, M325B, W330B, W345B II
325B L, 330B L, 345B, 345B II, 345B II MH, M325B, W330B, W345B II
1489068
HOSE AS
325B L
325B L
1456464
HOSE AS
325B L
325B L
1398866
HOSE
330B, 330B L, W330B
330B, 330B L, W330B
1347082
HOSE
330B, 330B L
330B, 330B L
1241653
HOSE
330B, 330B L, W330B
330B, 330B L, W330B
330 FM L, 330 L, 330B, 330B L, W330B
1767195
HOSE
330B L, W330B
330B L, W330B
330B, 330B L