HOSE AS 1246406 - Caterpillar

Configure the Machine Type
You can configure a new machine with the "Machine Settings" dialog.
In order to enter service mode, hold down the "OK" key while the display powers up.
From the "Setup Menu - Configuration" dialog, press the "Installation" soft key in order to list the items under the "Setup Menu - Installation" dialog.
Illustration 1 g01425428
Press the arrow keys until "Machine Settings" is highlighted. Press the "OK" key. A dialog that is similar to Illustration 1 appears.
Illustration 2 g01458547
Press the "Edit Machine" soft key and press the arrow keys until "Wheel Tractor-Scraper" is highlighted. Press the "OK" key. A dialog that is similar to Illustration 3 appears.
Illustration 3 g01310328
For a GPS system, use the arrow keys until the desired "Radio Type" is highlighted. Press the "OK" key.Select "TCXXXC/CRXXXC". Caterpillar systems normally use the CR900 radio or the CR450 radio.
Illustration 4 g01310339
Use the arrow keys in order to select "No".
Press the "OK" key.
Illustration 5 g01310346
Review the selections. Press the "OK" key in order to save the settings.
Press the "ESC" key in order to exit the "Setup Menu - Installation" dialog. The changes take effect immediately.