HOSE AS 1256645 - Caterpillar

ACTION REQUIRED
Install or remove the appropriate instruction films. Refer to the attached Rework Procedure.
OWNER NOTIFICATION
Owners in the following countries will receive the attached Owner Notification:
US
Canada
SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
100% 100% 0% 0% 0% 0%
This is a 0.5-hour job for Group 1
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
100% 100% 0% 0% 0% 0%
This is a 0.5-hour job for Group 2
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
EXAMPLE COPY OF OWNER NOTIFICATION
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE INSTRUCTION FILM
MODELS INVOLVED - CERTAIN 336F, 349F, AND 352F EXCAVATORS
Dear Cat Product Owner:
The instruction films either need to be installed or removed on the products listed below. The required films are not installed or there are unrequired films installed. You will not be charged for the service performed.
Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.
If you are no longer the owner of this product(s), please contact your local Cat dealer so that our records can be updated. Please refer the dealer to their Service Letter dated 07Apr2017 when scheduling this service.
We regret the inconvenience this may cause you, and urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to 07Apr2017 Service Letter
Rework Procedure
Group Number 1
1. Remove the 260-6941 Controls Film, with the 260-6944 Control Boom Film, and the 250-8054 Hammer Film from the cab glass. Refer to Image1.1.1.
Image1.1.1
Group Number 2
1. Install a new 250-8054 Hammer Film and 260-6941 Controls Film on the cab glass. Install a new 260-6944 Control Boom Film on to the 260-6941 Controls Film at the lower right side area. Refer to Image2.1.1.
Image2.1.1