HOSE AS 1290939 - Caterpillar

Illustration 1 g01198159
The default screen of the monitor is shown in Illustration 1. This screen appears when the monitor is initially turned ON.
Illustration 2 g01197980
Keys on the monitor (1) Up key (2) Right key (3) Home key (4) Menu key (5) Left key (6) Down key (7) Cancel key (8) OK key
Illustration 3 g01198279
Press menu key (4) . The screen shown in Illustration 3 will be displayed.
Press right key (2) or left key (5) in order to highlight the "SETTING" menu option from the "MAIN MENU" screen.
Illustration 4 g01198281
Press OK key (8) . The screen shown in Illustration 4 will be displayed.
Press up key (1) or down key (6) until "WORK TOOL SELECT" is highlighted.
Press OK key (8) .
Illustration 5 g01198295
After OK key (8) is pressed, the "WORK TOOL SELECT" menu will be displayed with the current options for work tool. Refer to Illustration 5.
Press up key (1) or down key (6) in order to highlight the desired work tool.Note: If the work tools have been configured through Cat® Electronic Technician (Cat ET), the names of the work tools will be displayed instead of the default names from the factory. The factory default names for the work tools are numbers, "TOOL #01" through "TOOL #10". Changing the factory work tool default name to the actual work tool name will simplify the selection of the work tool by the operator.
Illustration 6 g01198298
When BUCKET/NO TOOL is selected in the monitor, the hydraulic pumps produce maximum flow. Do not select BUCKET/NO TOOL when a work tool is attached to the machine.
When the desired tool is highlighted, press OK key (8) . If a dot appears in the circle to the left of "TOOL NAME", the work tool is selected. See Illustration 6.Note: Press home key (3) in order to return to the default display.