HOSE AS 1322128 - Caterpillar

Error Messages for the Reverse Fan
Table 38
REVERSE FAN
ERROR
"-HYD OIL TEMP HIGH"
Typical example of an error message for the reverse fan functionReverse Fan Function Will Not Start
The monitor will provide one of the following error messages if the reverse fan function does not start:"NOT INSTALLED" - The reverse fan is not installed on this machine. If this message is received in error, consult your Caterpillar dealer."HYD OIL TEMP HIGH" - The hydraulic oil temperature is too high. Shut off the engine and do not operate the machine until the hydraulic oil temperature is below 85 °C (185 °F)."COOLANT TEMP HIGH" - The coolant temperature is too high. Shut off the engine and do not operate the machine until the coolant temperature is below 95 °C (203 °F)."HYD LOCK SW OFF" - The hydraulic lockout control is in the UNLOCKED position. Move the hydraulic lockout control to the LOCKED position."SOL MALFUNCTION" - The reverse fan is malfunctioning. Consult your Caterpillar dealer.
Table 39
REVERSE FAN
Error
"Error ID : $0002"
Error ID : $0003
Error ID : $0004
Error ID : $0005
Reverse Fan Function Is Interrupted
If one of the following conditions occur, the reverse fan function will stop, and regular operation of the radiator cooling fan will resume:
The hydraulic lockout control is moved to the UNLOCKED position.
The temperature of the hydraulic oil rises above 90 °C (194 °F).
The coolant temperature rises above 100 °C (212 °F).This event will be accompanied by a "REVERSE FAN ERROR" message.Controllability Setting
Table 40
"Main Menu"
"Controllability Setting"
Boom Swing Priority
Table 41
"Controllability Setting"
"Boom Swing Priority"
Boom Swing Priority - This feature allows you to adjust the flow balance with each actuator. If you want the swing faster and the boom slower, select a high "Swing Priority #". If you want the boom up faster and the swing slower, select a high "Boom Priority #".