HOSE 1347321 - Caterpillar

Illustration 1 g01239377
Illustration 2 g01239425
The fuel tank is located on the rear of the machine. The filler cap (1) is on the left side of the machine next to the ROPS.Only vented fuel caps have filters. Machines without fast fill fuel adapter (2) require a vented fuel cap.
Illustration 3 g01110732
Lift lever (5) in order to remove the fuel tank filler cap. Turn the lever counterclockwise until the lever stops. Lift the cap straight up in order to remove the cap.
Remove the fuel strainer from the filler neck.
In order to replace the filter assembly, remove two screws that secure filter assembly (4) to the fuel cap. Remove filter assembly (4), valve (3), and the gaskets.
Wash the cap and the strainer in a clean, nonflammable solvent.
Inspect the tank cap seal. If the seal is damaged, replace the seal.
Replace the filter assembly, the valve, the gaskets, and the screws. Use a 9X-2205 Cap Filter Kit .
Install the strainer.
Install the fuel cap. Rotate the fuel cap clockwise until three tabs (7) drop into the slots in the adapter. Rotate lever (5) clockwise until the lever stops. Lower lever (5) over locking tab (6) .Fast Fill Fuel Adapter (If Equipped)
See illustration 2.Machines that are equipped with fast fill fuel adapter (2) have identical fuel caps (1) as systems without a fast fill fuel adapter. Use the same procedure for changing the filter in the two systems.