AVSPARE.COM
parts catalog

HOSE AS 1400423 - Caterpillar



1400423 HOSE AS Caterpillar parts HOSE
Rating:
61
Alternative (cross code) number:
CA1400423
140-0423
1400423
Caterpillar 1400423 HOSE AS

Buy HOSE AS 1400423 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

8. Remove pin (13), plug (14) and plug (12) from the spool. 9. Remove the bolts and directional valve group (15). 10. Remove plate (17) and spool (16) from the valve body. 11. Remove plate (18) from the valve body. 12. Remove springs (19), (20) and valve spool (21) from the valve body. 13. Remove differential control valve (22) from the control assembly. 14. Remove cover (23) from valve body. Remove the O-ring seal in cover. 15. Remove spool (30), spring (26), sleeve (29), springs (25) and (28), piston (24) and slug (27) from the valve body. 16. Remove spool (32) and spring (31) from the center valve bore.17. Remove spring (34) and spool (33) from valve body. 18. Remove bolts and cover (35) from valve body. 19. Remove spring (37) and spool (36) from valve body. 20. Remove plug (41), spring (40) and washer (39) from valve. Remove O-ring seal (38) from the plug. 21. Remove dowel (43) and stop assembly (44) from the valve body.22. Remove four dowels (42) and eight dampers if necessary. 23. Remove the modulating control valve group (45) from the manifold assembly (46). 24. Remove covers (47) and (48) from valve body. Remove two O-ring seals from cover (47) and one O-ring seal from cover (48). 25. Remove piston (52), springs (51) and (50) and spacer (49).26. Remove spring (54) and spool (53) from valve body. 27. Remove spool assemblies (56) and (58) from valve body.28. Remove slug (57) and spacers (55) from the spool assembly (56).29. Remove spring (60) and spool (59) from valve body.30. Remove the snap ring from valve spool with tool (B). 31. Remove retainer (62), spring (64), plunger (61) and pin (63) from spool. 32. Put spring (66) under compression. Remove snap ring with tool (A). Remove washer (67), spring (66) and washer (65) from the spool. 33. Remove four dowels (69) and dampers from the manifold if necessary. 34. Turn the manifold over and remove dowels (70) if necessary.Assemble Transmission Hydraulic Control Valve
Put clean SAE 30 oil on all the components before assembly.1. Install dowels (1) in the manifold so that they extend .31 in. (7.9 mm) above the top of the manifold surface (X). 2. Turn the manifold over and install two dowels (2). Dowels (2) must extend .25 in. (6.4 mm) above the surface. 3. Install washer (4), spring (5) and washer (6) on spool (3).4. Put spring (5) under compression and install snap ring (7) with tool (A). 5. Install plunger (8), spring (9), retainer (10) and pin (11) in the spool. Use tool (B) to install the snap ring that holds retainer (10) in place. 6. Install spacers (15) and slug (17) on spool assembly (16).7. Install spool assemblies (16) and (22) in the valve body.8. Install spools (19), (20) and springs (18) and (21) in the valve body.9. Install spacer (14), two springs (13) and piston (12) in the valve body. 10. Install O-ring seals (23) and (24) in covers (25)


Parts hose Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.