HOSE AS 1444105 - Caterpillar

Product Identification Number (PIN)
Illustration 1 g03788816
Illustration 2 g06201159Manufacturer Name and Address ____________________Model (A)____________________Build (B)____________________Product Identification Number (C)____________________Bar Code (D)____________________Month and Year of Manufacture Plate (If Required) (E)____________________CE Plate (If Required) (F)____________________Address of Manufacturer (G)____________________Issue (H)____________________Country of Origin Info Plate (If Required) (I)____________________Local regulation may require documentation of the month and/or year of manufacture in the Operation and Maintenance Manual. Enter on line (E) above if required.
Illustration 3 g03788819The Engine Serial Number and the Engine Information Plate is on the left side of the cylinder block to the rear of the front engine mounting.
Table 1
Engine Serial Number, Engine Information, and Governor Information Plate
Engine Serial Number
Engine Information European Union
Illustration 4 g01880193This plate is positioned on the bottom left side of the plate for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power Primary Engine (kW)____________________
Engine Power for Additional Engine (If Equipped) ____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year of Construction____________________
Machine Type ____________________For the name and address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.For the manufacturer name and address and the country of origin, see the PIN plate.Eurasian Economic Union
For machines compliant to the Eurasian Economic Union requirements, the EAC mark plate is positioned near the Product Identification Number (PIN) plate (see Product Information Section of the machine Operation and Maintenance Manual). The EAC mark plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.
Illustration 5 g06094564The Month and Year of Manufacture are on the PIN plate.Manufacturer Information
Manufacturer:Caterpillar Paving Products Inc.,
9401 85th Avenue North
Brooklyn park MN, 55445–2199
Entity authorized to communicate on request as required by Customs Union Technical Regulations of the Eurasian Economic Union:Caterpillar Eurasia LLC
75, Sadovnicheskaya Emb.
Moscow 115035, Russia
Sound Certification
Illustration 6 g00933634
A typical example of this film is shown. Your machine may have a different value.
If equipped, the certification film is used to verify the environmental sound certification of the machine. The value that is listed on the film indicates the guaranteed sound power level. The guaranteed sound power level is measured at the time of manufacture. The guaranteed sound power level is measured according to the conditions that are specified in "2000/14/EC".