HOSE AS 1520268 - Caterpillar

Key must be in run position with engine running to maintain electrical and hydraulic functions and prevent serious machine damage.If the engine does not start, return the key to the OFF position before returning it to the START position.Do not crank the engine for more than 30 seconds. Allow the starter to cool for two minutes before cranking again.
Illustration 1 g00392637
Insert the disconnect switch key into the battery disconnect switch. Turn the battery disconnect switch to the ON position.
Illustration 2 g00392678
Make sure that the reset button for the circuit breaker remains depressed.
Illustration 3 g00292499
Move the hydraulic activation control lever to the LOCKED position.This machine is equipped with an engine neutral start system. The system only allows the engine to start when the hydraulic activation control lever is in the LOCKED position.
Move the implement control levers to the HOLD position.
Illustration 4 g00103355
Turn engine start switch (1) to the ON position.
Illustration 5 g00101408
All of the indicators on the monitor panel should be activated for approximately 1.5 seconds and the action alarm should sound for one second. If any of the indicators are not activated or if the action alarm does not sound, check the electrical system. Make any necessary repairs before you start the engine.If the starter switch is held in the ON position for 2 seconds or more, the prestart monitoring function will be activated. The indicators for engine oil level (3) , coolant level (4) , or hydraulic oil level (5) will come on if the corresponding fluid level is too low.If the fluid level is too low, add the corresponding fluid to the specified level. Add the fluid before you start the engine.
Turn engine speed dial (2) to medium speed position "5" or medium speed position "6" .
Turn engine start switch (1) to the START position.
Release the engine start switch key after the engine starts.For temperatures above 0°C (32°F), the engine of this machine is designed to start without starting aids. For temperatures below 0°C (32°F), starting aids are available.