HOSE 1527996 - Caterpillar

No clearance for man in this area when turning machine. When machine is to be lifted, transported on another machine or service work is being performed near center of machine : Connect steering frame lock link between front and rear frames to keep machine in straight ahead position.
Before operation and when operating : Be sure steering frame lock link, located near lower center of machine, is disconnected and pinned to retaining plates. Located on the machine at the center pivot.General
Attach "DO NOT OPERATE" or similar warning tag to start switch or controls before servicing or repairing the machine. These tags, Form SEHS7332, are available from your Caterpillar dealer.Perform all maintenance unless otherwise specified as follows:- The parking/emergency brake engaged- The travel direction lever in neutral- The engine stopped- The disconnect switch off and the key removed- The steering frame lock link installed in the locking position.Wear a hard hat, protective glasses and other protective equipment as required by job conditions.Do not wear loose clothing or jewelry that can catch on controls or other parts of the machine. Make certain all protective guards and covers are secured in place on the machine.Keep the machine, especially the deck, walkways and steps, free of foreign material, such as debris, oil, tools and other items which are not part of the machine.Secure all loose items such as lunch boxes, tools and other items which are not part of the machine.Know the hand signals and who gives them. Accept signals from one person only.Never put maintenance fluids into glass containers.Report all needed repairs.Do not allow unauthorized personnel on the machine.Pressure air can cause personal injury. When using pressure air for cleaning, wear a protective face shield and protective clothing.Crushing Or Cutting Prevention
Never attempt adjustments while the machine is moving or the engine is running unless otherwise specified.Stay clear of all rotating and moving parts.Keep objects away from moving fan blades. They will throw or cut any object or tool that falls or is pushed into them.Do not use a kinked or frayed wire rope cable. Wear gloves when handling the wire rope cable.Retainer pins, when struck with force, can fly out an injure nearby persons.Wear protective glasses when striking a retainer pin to avoid injury to your eyes.Chips or other debris can fly off objects when struck. Make sure no one can be injured by flying debris before striking any object.Burn Prevention
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.At operating temperature, the hydraulic tank is hot and can be under pressure. Remove the hydraulic tank cover (4 screws) only after the engine has been stopped.Relieve all pressure in oil, fuel or cooling systems before any lines, fittings or related items are disconnected or removed. Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes.Fire Or Explosion Prevention
All fuels, most lubricants and some coolant mixtures are flammable.Do not smoke while refueling or in a refueling area.Do not smoke