HOSE-RADIATOR 1719016 - Caterpillar

Required Parts
Table 1
310-0440 Auxiliary Control Ar (- 00)
Item Qty Part No Description
(A) 1 335-0071 Foot Control
(B) 1 344-0847 Film Gp Installation Procedure
Illustration 1 g00104545Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.335-0071 Foot Control
Table 2
(A) 335-0071 Foot Control (- 00)
Item Qty Part No Description
(1) 1 093-2069 Grommet
(2) 1 205-1339 Pedal Switch Gp
(3) 1 337-8541 Support As
(4) 1 337-8542 Support As
(5) 1 349-1841 Stop Plate
(6) 2 099-2374 Bolt
(7) 2 8T-0269 Bolt
(8) 4 8T-4121 Hard Washer
(9) 4 8T-4137 Bolt
(10) 2 9X-2038 Washer
Illustration 2 g02351218
Illustration 3 g02351201
Lift the floor mat of the cab in order to gain access to the mounting location for the foot switch.Note: It may be necessary to remove a section of material from the floor mat during the installation of the switch. Mark then trim the floor mat.
Secure plate (3) to the floor of the cab with two washers (8), and two bolts (9).
Install the floor mat.
Secure plate (4) to plate (3). Use two bolts (9), and two washers (8).
Attach plate (5) to plate (4). Use two bolts (7), and two washers (10).
Secure the footswitch (2) to plate (4). Use two bolts (6). Refer to Illustrations 2 and 3.344-0847 Film Gp
Table 3
(B) 344-0847 Film Gp
Item Qty Part No Description
(1) 1 250-8054 Film
(2) 1 176-2815 Film
Illustration 4 g02156322
(1) 250-8054 Film (Hammer)
(2) 176-2815 Film (Controls)
Install all film components to the appropriate locations. Refer to Illustration 4.