HOSE AS 1720306 - Caterpillar

g01067344
HYDRAULIC TANKRELIEVE TANK PRESSURE WITH ENGINE OFF BY REMOVING CAP SLOWLY TO PREVENT BURNS FROM HOT OIL.
Hot Surface (11)This message is located on the radiator and on other hot surfaces.
g00921005
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Crushing Hazard (12)This safety message is located on both sides of the back end of the machine.
g01067376
Machine swings. Stay back. Crushing hazard could cause serious injury or death.
High Pressure Gas (13)This safety message is located on the accumulator in the right back compartment.
g01374065
This system contains high pressure gas. Failure to follow the instructions and warnings could cause an explosion, resulting in possible injury or death.Do not expose to fire. Do not weld. Do not drill. Relieve pressure before discharging.See Operation and Maintenance Manual for charging and discharging. See your Caterpillar Dealer for tools and detailed information.
Refer to Operation and Maintenance Manual, "Equipment Lowering with Engine Stopped" for further information. Pressurized System (14)This safety message is located on top of the radiator, next to the filler cap.
g01067344
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Aerosol Starting Aid (15)This safety message is located inside the left front compartment on the engine air filter.
g01067463
Explosion hazard! Do not use ether! This machine is equipped with an air inlet heater. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the starting procedure in the Operation and Maintenance Manual.
Refer to Operation and Maintenance Manual, "Engine Starting" for further information.Crushing Hazard (16)This safety message is located on both sides of the stick.
g01385579
A crushing hazard exists when the stick and boom are in motion and when the machine is being used in object handling applications. Failure to stay clear of the stick and boom when the machine is in operation can result in personal injury or death. Stay clear of the stick and boom when the machine is in operation.