HOSE GP 1763060 - Caterpillar

VIEW FROM UNDER MACHINE1. Remove bolt (1) that fastens clamp (2) to the chassis.
VIEW FROM UNDER MACHINE2. Put tool (A) in position under the rear drive shaft as shown.
To prevent possible personal injury be sure the drive shaft is fastened to tool (A).
3. Remove bolts (4) that fasten each end of drive shaft (3) to the transmission and differential. Carefully lower and remove the rear drive shaft. The weight of the rear drive shaft is 100 lb. (45 kg).Install Drive Shaft (Rear)
VIEW FROM UNDER MACHINE1. Put rear drive shaft (1) in position on tool (A).
To prevent possible personal injury be sure the drive shaft is fastened to tool (A).
2. Put the drive shaft in position between the differential and the transmission. Install the bolts that fasten the drive shaft to the differential and transmission. Tighten the bolts to a torque of 100 11 lb.ft. (135 15 N m).
VIEW FROM UNDER MACHINE3. Install clamp (2) on the chassis with a bolt and lockwasher.