HOSE AS 1838040 - Caterpillar

Table 1
SERVICE TABLE - RECORD OF SETPOINT VALUES    
Generator Description: Site, Serial No., EMCP II Model No., etc.    
Setpoint    Specified Value    Actual Value (1)    Setpoint Description    Possible Values    Default Value    
Setpoint Programming - OP5    
P01             Fuel Solenoid Type     0 = ETR, 1 = ETS     0    
P02             Units Shown     0 = Eng, 1 = metric     0    
P03             Shutdown Override For Engine Fault     0 = shutdown, 1 = alarm     0    
P04             Shutdown Enable For Sensor Fault     0 = alarm, 1 = shutdown     0    
P05             Coolant Loss Sensor     0 = w/o sensor, 1 = w/sensor        
P06             Shutdown Override For Coolant Loss Fault     0 = shutdown, 1 = alarm     0    
P07             System Voltage     0 = 24 volts, 1 = 32 volts     0    
P08 (2)             Upper Display     0 = enable, 1 = disable     0    
P09             Ring Gear Teeth     95 to 350 teeth     136 teeth    
P10             Engine Overspeed     500 to 4330 rpm     2120 rpm    
P11             Crank Terminate Speed     100 to 1000 rpm     400 rpm    
P12             Oil Step Speed     400 to 1800 rpm     1350 rpm    
P13             Low Oil Pressure Shutdown At Rated Speed    
34 to 420 kPa (5 to 60 psi)    
205 kPa (30 psi)    
P14             Low Oil Pressure Shutdown At Idle Speed    
20 to 336 kPa (3 to 50 psi)    
70 kPa (10 psi)    
P15             High Water Temperature Shutdown    
85 to 123°C (185 to 253°F)    
107°C (225°F)    
P16             Low Water Temperature Alarm    
0 to 36°C (32 to 97°F)    
21°C (70°F)    
P17             Total Cycle Crank Time     5 to 120 seconds     90 seconds    
P18             Cycle Crank Time     5 to 60 seconds     10 seconds    
P19             Cooldown Time     0 to 30 minutes     5 minutes    
P20             AC Voltage Full Scale     150 V to 18000 V     700 V    
P21             AC Current Full Scale     75 A to 40000 A     600 A    
P22 (3)             GSC Engine Number     01 to 08     01    
P23             Engine Type     0 = MUI diesel, 1 =