HOSE 1905793 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Lifting Bracket 2
B FT2712 Guide Stud 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01953202
Install Tooling (A) on the flywheel. Use a suitable lifting device. The weight of the flywheel is approximately 40 kg (88 lb).
Remove two bolts (1). Install Tooling (B).
Remove remaining bolts (1) that hold the flywheel to the crankshaft . Remove flywheel (2).
Illustration 2 g01953204
If necessary, use a hammer and a punch in order to remove ring gear (3) from the flywheel. Installation Procedure
Install flywheel (2) in the reverse order of removal.
Tighten bolts (1) to a torque of 270 40 N m (200 30 lb ft).