HOSE 1935119 - Caterpillar

SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-20000 hrs,
0-72 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job for Group 1
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-20000 hrs,
0-72 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 3.0-hour job for Group 2
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Group Number 1
Check the retainer to strut bolt torque. Refer to Image 1.1.1. These bolts do not have a torque turn requirement so they may be checked using a static torque check. The torque that the fastener, threaded connector, etc., shall withstand without movement. Static inspection torque provides an indication that minimum assembly requirements have been achieved. Each bolt should be checked to a static torque of 1400 Nm. If movement is found on any bolt, tighten that bolt to the D&A assembly spec (1600+/-200 Nm). If the bolt does not reach the proper assembly spec, replace that bolt and tighten to the required torque specification(1600+/-200 Nm). If these bolts are