HOSE AS 1938313 - Caterpillar

ACTION REQUIRED
***** Parts Stock *****
0R3860, 0R3233, and 0R9250 scavenge oil pumpsin dealer parts inventory check build date code of pump.
For pumps in the Date range of September 1, 2004? March 23, 2005 check the S/N on the pump housing. If the S/N falls intothe (B4078-B4256) range then replace the entire pump with a new remanufacturedscavenge oil pump of same p/n as bad pump.
If the pump build date code is September 1, 2004? March 23, 2005, and pump housing S/N does not fall into the specifiedrange (B4078-B4256) then disassemble the drive gear from the pump.Utilizing alcohol clean the pump shaft and gear taper. Install and torquethe 161-2513 drivegear utilizing the SENR2353-03 Specification for 3500 Industrial EngineAttachments.
*****Affected Product *****If the engine installed in ServiceLetter Affected Product is a Remanufactured Engine S/N listed in Table1 below perform the following:
Check that scavenge oil pump p/n installedon remanufactured engine is a remanufactured p/n 0R3860, 0R3233, or 0R8250.
If scavenge oil pump is a remanufacturedpump then check the s/n on the pump housing. If the pump housing s/n isin range B4078-B4256 replace the entire pump with a remanufactured pumpfrom the list in "Parts Needed" section above.
If scavenge oil pump is a remanufacturedpump and pump housing s/n is not in range B4078-B4256, then disassemblethe drive gear from the pump. Utilizing alcohol clean the pump shaft andgear taper. Install and torque the 161-2513 drive gear utilizing the SENR2353-03Specification for 3500 Industrial Engine Attachments.
If drive gear has failed on remanufacturedscavenge oil pump replace the entire pump with a remanufactured pump fromthe list in "Parts Needed" section above.
Table 1:
Group 1
4ZL 01032 -1084
5TL 00712 - 740
5XS 00576 - 625, 628, 630,632, 635, 637-639, 642, 644
BTB 00042 - 48
BTR 00259 - 273
KAM 00224 - 228
BWA 00153 - 157
Group 2
5EL 00303 - 315
6FL 00761 - 774, 776
7SS 00813 - 818
Group 3
6CL 00511 ? 520, 522
7CL 01541 ? 1585, 1587-1597
7DS 00495 ? 519, 521-523,526, 528
CPW 00554 ? 617
KNS 00315 ? 359, 361-362,367
Group 4 (Front Engine Only)
CND 00409
NPM 00104 ? 108, 110SERVICE CLAIM ALLOWANCES
***** Parts Stock *****Submit one claim for all oil pumps that werereworked in dealer parts stock.***** Affected Product *****
Product smu/age whichever comesfirst Caterpillar Dealer Suggested Customer Suggested
Parts Labor Hrs Parts Labor Hrs Parts Labor Hrs
0-999999 100% 14.0 0 0 0 0
Action 1: Inspection and reworktime for pumps in dealer inventory. This is a 1-hour Job. Action 2: Inspection and reworkof engine. This is a 14-hour job. Action 2: If this repair is madeat overhaul, Parts may only be claimed. Labor cannot be claimed at overhaul.PARTS DISPOSITION
Handle the parts in accordance with your WarrantyBulletin on warranty parts handling.